進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
USB到TTL串行電纜
原名
USB to TTL Serial Cable
貨號
CAB-12977
特價
343
資料來源：https://www.sparkfun.com/products/12977
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow), TX (Orange), VCC (Red), and GND (Black). A link to the FTDI drivers can be found in the Documents section below.
Note: Please be aware that while the I/O pins in this cable operate at 3.3V, the VCC pin is 5V. The VCC pin is NOT 3.3V like the I/O pins.
Documents:
這是TTL串口線，讓一個簡單的方法將TTL接口設備連接到一個USB USB。該電纜的I / O引腳被配置在3.3V專門用樹莓派與每個串行針碎裂開來操作。由於其分離引腳，該電纜是供電，連接和訪問的樹莓派的登錄名和調試控制台一個完美的候選人。
FTDI的電纜是一種以FT232，它坐落在一個USB-A接口。電纜的另一端終止與分離4針連接器具有以下引腳：RX（黃色），TX（橙色），VCC（紅色）和GND（黑色）。到FTDI驅動程序的鏈接可以在下面的文檔中找到。
注：請注意，雖然這種電纜的I / O引腳工作在3.3V的VCC引腳為5V。 VCC引腳是不是3.3V，如I / O引腳。
文件：
