進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

Arduino的烏諾 - R3

原名
Arduino Uno - R3

貨號
DEV-11021

特價
1,030

資料來源:https://www.sparkfun.com/products/11021

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Never fear for accidental electrical discharge, either since since the Uno R3 also includes a plastic base plate to protect it!

The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!

Includes:

  • 1x Arduino Uno - R3
  • 1x Plastic Base Plate

Features:

  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

Documents:

這是新的Arduino的烏諾R3。除了前面板上的所有功能,歐諾現在使用的歐諾發現了一個ATmega16U2代替8U2(或FTDI上上代找到)。這允許更快的傳輸速率和更大的內存。無需驅動程序需要Linux或Mac(需要為Windows INF文件,並列入Arduino的IDE),並有歐諾顯示為鍵盤,鼠標,操縱桿等的能力

歐諾R3還增加了旁邊AREF SDA和SCL引腳。此外,也有放置RESET管腳附近的兩個新的引腳。其中之一是,允許屏蔽,以適應從板提供的電壓IOREF。另一種是未連接,並且被保留用於未來的用途。歐諾R3適用於所有現有的盾牌,但能適應其使用這些額外的引腳新的盾牌。

Arduino是基於一個簡單的I / O板,並實現了一個開發環境,一個開源的物理計算平台處理 / 接線語言。 Arduino的可用於開發獨立的交互式對象或可連接到軟件的計算機(例如閃光,處理中,MaxMSP)上。開源IDE可免費下載(目前用於Mac OS X,Windows和Linux)。

注:Arduino的烏諾R3要求的Arduino 1.0 drivers文件夾,以便在某些計算機正確安裝。我們已經測試和證實,R 3可以在舊版本的IDE進行編程。但是,使用R3的新計算機上的第一次,你將需要有Arduino的1.0的機器上安裝。如果您有興趣閱讀更多有關更改IDE,請查看官方Arduino的1.0版本註釋

不知道它的Arduino Arduino的或兼容的主板更適合你?看看我們的Arduino購買指南

特徵:

  • ATmega328微控制器
  • 輸入電壓 - 7-12V
  • 14數字I / O引腳(6路PWM輸出)
  • 6個模擬輸入
  • 32K閃存
  • 16MHz的時鐘速度

文件:

前往
現貨型錄

Line share