資料來源:https://www.seeedstudio.com/XY-Plotter-Robot-Kit-v2.0-%28No-electronic%29-p-2165.html
Introduction:
Makeblock XY-Plotter 2.0 is a updated version of XY-plotter. With the Processing and GRemote, You can draw amazing pictures with Gcode.
Since we reinforce the structure, the XY-plotter 2.0 is stronger enough to be conversed to MiniCNC, 3D printer, driller, etc. And the movement of the terminal is stable and precise since the improved dual-way transmission mechanism.
Features:
Strong aluminum extrusion parts, anodizing surface
Two Metal stepper motor with back shaft
12V Solenoid include
Closed type bushing block and ball bushing insert for use in linear motion applications
Four-bolt aluminum alloy bushing block for a lightweight ready-to-mount installation
Synthetic resin retainer plate for accurate ball guidance and low noise
Four rows of recirculating balls inside the ball bushing for smooth running
Integral lip seals to retain lubricant and protect against contamination
Round steel shaft for use with slide units in linear motion applications.
Chrome plated for corrosion resistance
Case hardened for wear resistance
Precision ground for consistent ball bushing radial clearance
Note:
With this kit, you can only build a XY-Plotter without controller. You can use your own electronic parts to drive this.
Part List:
4 × Linear Motion Shaft D8×480 |
2 x Stepper Motor |
30 × Plastic Rivet 4120 |
6 × Linear Motion Slide Unit 8mm |
2 × Stepper Motor Bracket |
25 × Plastic Ring 4x7x2mm |
1 × Solenoid-12V |
4 × Timing Pulley 90T |
10 × Plastic Ring 4x8x1mm |
2 × Beam 0824-496 |
8 × Timing Pulley Slice 90T |
35 × Screw M4×8 |
1 × Beam 0824-144 |
1 × Open-end Timing Belt (3m) |
60 × Screw M4×14 |
3 × Beam 0824-128 |
3 × Link Rod |
2 × Srew M4×30 |
1 × Beam 0824-96 |
2 × Shaft Connector-4 |
40 × Nylong Lock Nut M4 |
3 × Beam 0824-80 |
3 × Threaded Shaft 4×39mm |
20 × Nut M4 |
1 × Beam 0808-96 |
3 × Shaft Collar 4mm |
15 × Nylon Cable Ties |
1 × General Bracket |
4 × Flange Bearing 4x8x3mm |
1 × Cross Screwdriver |
2 × Bracket 3x6 |
8 × Headless Set Screw M3x5 |
1 × Screwdriver 3mm |
14 × Bracket 3×3 |
15 × Countersunk Screw M3x8 |
2 × Screwdriver 1.5mm |
2 × Plate 3×6 |
|
|
Documents:
The user guide and troubleshooting of XY-Plotter
Weight | G.W 3100g |
Battery | Exclude |
介紹:
Makeblock xy 繪圖器2.0 是一個更新版本的 xy 繪圖器。隨著加工和 GRemote, 您可以繪製驚人的圖片與 Gcode。
由於我們加強了結構, XY 繪圖器2.0 是強大到足以與 MiniCNC, 3D 印表機, 司鑽等。自改進的雙路傳動機構以來, 終端的運動穩定、精確。
功能:
強鋁擠壓件, 陽極氧化表面
兩個帶後軸的金屬步進電機
12V 電磁閥包括
線性運動應用用閉式套管和滾珠襯套
四螺栓鋁合金襯套, 用於輕型準備安裝
用於精確球導和低雜訊的合成樹脂固定板
四排的迴圈球內球套管順利運行
整體唇密封以保持潤滑劑和防止污染
用於直線運動應用的滑動單元的圓鋼軸。
耐腐蝕鍍鉻
耐磨外殼硬化
球軸承徑向間隙的精密研磨
注意:
使用此工具組, 您只能生成不控制器的 XY 繪圖器。你可以使用自己的電子零件來驅動這個。
部件清單:
4 x 直線運動軸 D8×480 | 2 x 步進電機 | 30 x 塑膠鉚釘4120 |
6 x 直線運動滑動單元8mm | 2 x 步進電機支架 | 25 x 塑膠環4x7x2mm |
1 x Solenoid-12V | 4 x 定時滑輪90T | 10 x 塑膠環4x8x1mm |
2 x 光束0824-496 | 8 x 定時滑輪片90T | 35 x 螺絲 M4×8 |
1 x 光束0824-144 | 1 x 開尾定時帶 (3m) | 60 x 螺絲 M4×14 |
3 x 光束0824-128 | 3 x 連杆 | 2 x 杆 M4×30 |
1 x 光束0824-96 | 2 X 軸 Connector-4 | 40 x Nylong 鎖緊螺母 M4 |
3 x 光束0824-80 | 3 x 螺紋軸4×39mm | 20 x 螺母 M4 |
1 x 光束0808-96 | 3 X 軸頸4mm | 15 x 尼龍紮帶 |
1 x 一般托架 | 4 x 法蘭軸承4x8x3mm | 1 x 十字螺絲刀 |
2 x 托架3x6 | 8 x 無頭固定螺絲 M3x5 | 1 x 螺絲刀3mm |
14 x 托架3x3 | 15 x 埋頭螺絲 M3x8 | 2 x 螺絲刀1.5mm |
2 x 板3×6 |
|
|
檔:
重量 | G. W 3100g |
電池 | 排除 |