官方授權台灣代理分銷
SquareWear V2.0（Arduino的耐磨）
原名
SquareWear v2.0 (Wearable Arduino)
貨號
102990088
分類
Hats & Plates
特價
882
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/SquareWear-v2.0-%28Wearable-Arduino%29-p-1812.html
Description
SquareWear 2.0 is an open-source, Arduino-based wearable microcontroller board. It is small, low-cost, and provides an all-in-one solution for wearable as well as general-purpose electronics projects.
At heart SquareWear is an Arduino running at 3.3V and 12MHz. It has large pin holes suitable for sewing with conductive thread, soldering with wires or sew-on snaps, and they are great for touch sensing too. SquareWear is packed with useful components. It has an on-board mini-USB port for uploading a sketch, charging Lithium battery, and creating serial communication. It’s preloaded with an USBasp bootloader. No external programmer is needed. It has a color LED, a general-purpose push-button, a buzzer, a light sensor, a temperature sensor, and N-MOSFETs to drive high-current load. In addition, it has a built-in LIR2032 rechargeable lithium coin battery, so you can power your projects right away without any external power supply. Every time you plug in the mini-USB cable, it charges the coin battery automatically. If needed, you can also plug in an external LiPo battery through the on-board battery jack. It’s perfect for building wearable as well as general-purpose microcontroller projects. It’s great platform for learning Arduino programming too.
Note:unlike the standard Arduino, SquareWear does not have a USB-to-serial chip. Instead, it simulates USB functionality in software using the V-USB library.
YouTube Video 1
YouTube Video 2
Technical Spec
ATmega328 running at 3.3V, 12MHz, pre-loaded with USBasp bootloader.
XC6206P332MR 3.3V / 250mA LDO.
TP4057 Lithium charging chip and charging indicator LED.
MCP9700 temperature sensor; 10K LDR (light sensor).
8.5mm SMT buzzer; 6mm SMT tactile button.
2.0mm JST connector for external lithium battery.
2N7002 MOSFETs, SMT mini-USB port, and power switch.
5mm color (RGB) LED.
LIR2032 (20mm) rechargeable lithium coin battery (45mAh capacity).
Resources
Please check here for forum discussions, and support@rayshobby.net for technical support.
Technical Details
| Weight | G.W 11g |
| Battery | Exclude |
描述
SquareWear 2.0是一個開源的，基於Arduino的耐磨板的微控制器。它體積小，成本低，並提供耐磨以及通用電子項目的所有功能於一身的解決方案。
在心臟SquareWear是一個Arduino運行在3.3V和12MHz的。它適用於導電絲，焊接用線或手縫扣縫大針孔，他們都是偉大的式觸摸傳感了。 SquareWear是擠滿了有用的組件。它具有用於上傳的草圖，充電鋰電池，並創建串行通信板上迷你USB端口。它大局;預裝了一個引導程序USBASP。無需外部編程。它有一個彩色LED，通用按鈕，一個蜂鳴器，一個光傳感器，溫度傳感器，和N-MOSFET的驅動高電流負載。此外，它有一個內置LIR2032可充電鋰鈕扣電池，這樣可以增強您的項目馬上無需任何外接電源。每次你在迷你USB線插入時，它會自動充電鈕扣電池。如果需要，您還可以通過主板上的電池插口插上外接鋰聚合物電池。它大局;完善建設耐磨以及通用微控制器項目。它大局;學習Arduino的編程太大平台。
注：不像標準的Arduino，SquareWear沒有一個USB轉串口的芯片。相反，它使用V-USB庫模擬USB功能的軟件。
YouTube影片1
YouTube影片2
技術指標
ATmega328在3.3V，12MHz的運行，預裝USBASP引導程序 。
XC6206P332MR 3.3V /250毫安LDO。
TP4057鋰電池充電芯片和充電指示燈。
MCP9700溫度傳感器; 10K LDR（光傳感器）。
8.5毫米SMT蜂鳴器; 6毫米SMT觸覺按鈕。
2.0毫米JST連接外接鋰電池。
2N7002的MOSFET，SMT迷你USB接口和電源開關。
5毫米色（RGB）LED。
LIR2032（20毫米）可充電鋰鈕扣電池（45mAh容量）。
資源
請在這裡為論壇的討論， support@rayshobby.net~~V的技術支持。
