資料來源:https://www.seeedstudio.com/Protoshield-Kit-for-Arduino-p-318.html
Standard Arduino compatible
Large 0.1"*0.1"pitch prototyping area
A variety of through-hole sizes to fit most parts
Arduino UART and I2C port pin breakout for easy external communications
Dual ISP breakouts for easy programming and stacking
3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
Breadboard style prototyping area
USB type B breakout
Basic components included (buttons, switches, LEDs, resistors, USB jack)
1x Arduino compatible Proto Board
1x B type USB connector
1x 40-pin 2.54mm male long header
1x 40-pin 2.54mm female header
2x 40-pin 2.54mm male header
1x 40-pin 2.54mm spacer
3x 8-pin 2.54mm female header
1x 6-pin 2.54mm female header
1x ISP female pin header
1x ISP male pin header
1x 10k Ohm rotary potentiometer
4x 1k Ohm through-hole resistor
2x 10k Ohm through-hole resistor
2x 3mm Red through-hole LED
2x 3mm Green through-hole LED
1x 3mm dual color through-hole LED
4x Mini push button switch
2x DPDT switch
Dimensions | 110mm x 80mm x 21mm |
Weight | G.W 42g |
Battery | Exclude |
Arduino compatible Proto Board | 1 |
B type USB connector | 1 |
40-pin 2.54mm male long header | 1 |
40-pin 2.54mm female header | 1 |
40-pin 2.54mm male header | 2 |
40-pin 2.54mm spacer | 1 |
8-pin 2.54mm female header | 3 |
6-pin 2.54mm female header | 1 |
ISP female pin header | 1 |
ISP male pin header | 1 |
10k Ohm rotary potentiometer | 1 |
1k Ohm through-hole resistor | 4 |
10k Ohm through-hole resistor | 2 |
3mm Red through-hole LED | 2 |
3mm Green through-hole LED | 2 |
3mm dual color through-hole LED | 1 |
Mini push button switch | 4 |
DPDT switch | 2 |