Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick pHAT.
Flick Zero is a 3D tracking and gesture pHAT that lets you control the Raspberry Pi Zero mini-computer as if by magic! Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle, swipe your hand – Flick will track it.
Integrate Flick into your Raspberry Pi project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non-conductive material (wood/acrylic) and still use Flick (please note however that mounting it in this way may reduce the sensor range).
Plug and play functionality allows you to get up and running within minutes. Use our software libraries (complete with one-line installer) to fully explore what you can do with Flick. Control your computer, TV, music system and more all with a Flick of the wrist!
Features
Fully compatible with Pi Zero & Pi Zero W
Also works with Raspberry Pi A+, B+, 2B, 3B and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
3D tracking
Gesture sensing up to 15cm
Touch and Tap sensing
Communicates with the Raspberry Pi via I2C
Full software libraries (fully open-source code)
One-line installer
No soldering required
Dimensions: 6.5cm x 3cm x 0.6cm
Fully CE and FCC tested and approved
Technical Details
Chip: MGC3130 3D Tracking and Gesture Controller
Detection range: 0 to 15 cm in ideal circumstances
Temperature Range: -20℃ to +85℃
Position Rate: 200 positions/sec
Spatial Resolution: up to 150 dpi
Proximity and Touch Sensing
Flick Large has a red/green dual RGB LED that can be driven using pins LED1 and LED2
Flick Large has level shifting on board so can work with any microcontroller with either 5V or 3V3 power and data signals
Compatible with the Hillstar Development Kit over USB on PC in order to use with a computer or to program new firmware onto the board.
Available gestures: Swipe (east to west, west to east, north to south, south to north), tap and double tap (center, east, west, north, south), airwheel (clockwise, anti-clockwise) and touch (center, east, west, north, south)
Works even through the Flick Large case
No detection blind spots
Low–power design
Dimensions | 130mm x 75mm x 25mm |
Weight | G.W 50g |
Battery | Exclude |
Flick Zero | 1 |
Plastic bolts | 8 |
Plastic spacers | 4 |
Stickers | 3 |
Info card | 2 |
滑動,點擊或輕拂手腕,用Flick pHAT來控制你的Raspberry Pi。
Flick Zero是一個3D跟踪和手勢pHAT,可讓您控制Raspberry Pi Zero迷你電腦,就像魔術一樣! Flick使用技術,使PCB能夠在3D空間中從多達15cm的距離檢測您的手勢。畫一個圓圈,滑動你的手 - Flick會跟踪它。
將Flick集成到您的Raspberry Pi項目中,為您提供多種控制方式。使用近場手勢技術,您可以將項目隱藏在非導電材料(木材/丙烯酸)之後,仍然使用Flick(請注意,以這種方式安裝可能會降低傳感器範圍)。
即插即用功能可讓您在幾分鐘之內起床和運行。使用我們的軟件庫(完整的單行安裝程序)來充分探索您可以用Flick做什麼。控制您的電腦,電視,音樂系統等等,所有與手腕輕彈!
特徵
完全兼容Pi Zero&Pi Zero W
還可以與Raspberry Pi A +,B +,2B,3B和所有其他40個GPIO引腳(或兼容板)的覆盆子豌豆一起使用。
3D跟踪
手勢感應可達15cm
觸摸並點擊感應
通過I2C與Raspberry Pi進行通信
完整的軟件庫(完全開放源代碼)
單行安裝程序
無需焊接
尺寸:6.5cm x 3cm x 0.6cm
完全通過CE和FCC測試和認可
技術細節
芯片:MGC3130 3D跟踪和手勢控制器
檢測範圍:理想情況下0〜15厘米
溫度範圍:-20℃至+ 85℃
位置率:200位/秒
空間分辨率:高達150 dpi
接近和触摸感應
Flick Large有一個紅/綠雙RGB LED,可以使用LED1和LED2引腳驅動
Flick Large具有電平變化,因此可以與任何具有5V或3V3電源和數據信號的微控制器配合工作
通過USB在PC上與Hillstar開發套件兼容,以便與計算機一起使用或將新固件編程到板上。
可用手勢:滑動(東西向西,東向東,北向南,南向北),水龍頭(中,東,西,北,南),風車(順時針,逆時針)和触摸(中心) ,東,西,北,南)
即使通過Flick Large案例也可以工作
無檢測盲點
低功耗設計