資料來源:https://www.seeedstudio.com/Raspberry-Pi-GPIO-Expansion-Module-p-2280.html
This module is designed specifically for the Raspberry Pi B+/A+ IO expansion modules, which can effectively solve the Raspberry send IO port insufficient. Module uses four 74HC595 chips to expand 32 IO ports. As shown above, the top of the module will expand the IO of Raspberry Pi again that can be cascaded for more IO expansion modules can theoretically unlimited expansion.
Specification:
Product Features:
Expanded 32 GPIO
Infinity connection for the same module
Use wiringPi API ,sample code
Compatible with Raspberry Pi A+,B,B+/2.
Port:
Raspberry Pi 2X13 port
Raspberry Pi 2X13 cascade port
Q0-Q31 expanded IO port
Product Parameters:
Working voltage: 2.4V-5V
IO voltage: 3.3V
Expanded 32 unidirectional IO
Connection through SPI
100 MHz (typical) shift out frequency
8-bit serial input
8-bit serial or parallel output
Specified from -40C to +85C and from -40C to +125C
Typical Application:
Drive the lattice screen
Driver numeric display
Drive matrix LED
Product Specification:
Weight | G.W 26g |
Battery | Exclude |
本模組專為覆盆子 Pi B +/A + io 擴展模組設計, 可有效解決樹莓發送 io 口不足的問題。模組使用四74HC595 晶片擴展 32 IO 埠。如上所示, 該模組的頂部將擴大樹莓 Pi 的 io 再次, 可以級聯的更多 io 擴展模組可以理論上無限擴展。
規範:
產品特點:
擴展 32 GPIO
同一個模組的無窮大連接
使用 wiringPi API, 示例代碼
與覆盆子 Pi A+,B,B+/2 相容。
埠:
覆盆子 Pi 2X13 港
樹莓 Pi 2X13 級聯埠
Q0-Q31 擴展 IO 埠
產品參數:
工作電壓: 2.4V-5 v
IO 電壓: 3.3V
擴展32單向 IO
通過 SPI 進行連接
100兆赫 (典型) 移出頻率
8位串列輸入
8位串列或並行輸出
指定從-40C 到 + 85 c, 從-40C 到 + 125 c
典型應用:
驅動格子螢幕
驅動程式數字顯示
驅動矩陣指示燈
產品規格:
重量 | G. W 26g |
電池 | 排除 |