資料來源:https://www.seeedstudio.com/Raspberry-Pi-0.96%E2%80%9D-OLED-Display-Module-p-2390.html
Raspberry Pi 0.96’ OLED display module is made by 128x64 yellow and blue OLED pixels , diagonal is only 0.96 inch . The controller is SSD1306, communicates via 4-wire SPI, the display have its own backlight, no backlight LED is required ,This reduces the power required to run the OLED and is why the display has such high contrast , extremely wide viewing angle and extremely operating temperature
Product Overview:
Features:
Ultra low power supply
Maximum current 100uA
Keep up current 12.25uA
Hardware keep up display
3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
Internal DC/DC voltage converter
SPI driver support , AT 64MHz[TYP] 125MHZ[OB]
FP frequency: 64fps[TYP] 368fps[OB]
Compatible with Raspberry Pi A+,B,B+/2.
Specification:
Outline Drawing: 370x300(mm)
Number of pixels: 128x64
Panel size:26.70x19.26x1.45(mm)
Active area: 21.74x10.864(mm)
Pixel pitch 0.17x0.17(mm)
Pixel size: 0.154x0.154(mm)
Hardware conection:
Document
Dimensions | 105mm x 80mm x 20mm |
Weight | G.W 21g |
Battery | Exclude |
覆盆子 Pi 0.96 的 oled 顯示模組是由128x64 黃色和藍色的 oled 圖元, 對角線只有0.96 英寸。控制器是 SSD1306, 通過4線 SPI 進行通信, 顯示器有自己的背光, 不需要背光 LED, 這就降低了運行 OLED 所需的功率, 是為什麼顯示器具有如此高的對比度, 極寬的視角和極工作溫度
產品概述:
功能:
超低功率電源
最大電流100uA
保持當前12.25uA
硬體保持顯示
3.3V 工作電壓 ([最小 1.6V], [最大: 3.6V])
內直流/直流電壓轉換器
SPI 驅動程式支援, 在 64 mhz [典型] 125 mhz [OB]
FP 頻率:64 fps [典型] 368 fps [OB]
與覆盆子 Pi A+,B,B+/2 相容。
規範:
外形圖: 370x300 (mm)
圖元數: 128x64
面板尺寸: 26.70x19.26x1.45 (mm)
活動面積: 21.74x10.864 (mm)
圖元間距 0.17x0.17 (mm)
圖元大小: 0.154x0.154 (mm)
硬體連接:
文檔
尺寸 | 105mm x 80mm x 20mm |
重量 | G. W 21g |
電池 | 排除 |