現貨供應最新開發模組
單晶矽太陽能電池板、太陽能板 5.5V 0.5W 55x70 mm2
這是一片特別訂製的太陽能面板，略高於 5V 的峰值電壓能夠直接支援許多嵌入式開發板，並且具備高達 17% 的能源轉換效率。表面經過塗裝處理，並具備硬式背板。強固的封裝相當適合戶外應用！
配置有 2.0mm JST 連接頭。
原廠連結：http://www.seeedstudio.com/depot/05W-Solar-Panel-55x70-p-632.html
This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which makes it perfect to team up with most of our can-use-solar-power-supply boards, like Seeeduino microcontroller series, Lipo Rider charging boards series and XBee carrier WSN products series.
The typical open circuit voltage is around 5V, depending on light intensity. In those bright summer days with clear sky and big sun, the peak OC voltage can rush up to 10V. To prevent any damage to boards that accept a narrow range of input voltage, like Lipo Rider, it's recommended to check whether the OC voltage is safe before any connection.
Features
- Dimensions: 70x55x3(±0.2) mm
- Typical voltage: 5.5V
- Typical current: 100mA
- Open-circuit voltage: 8.2 V
- Maximum load voltage: 6.4V
Weight: 20 g
資料來源：https://www.seeedstudio.com/0.5W-Solar-Panel-55x70-p-632.html
Description
Many people like solar energy because it is simple, clean and renewable. Especially when you are building outdoor projects, solar energy is one of the best solutions for power supply. Depending on the project you are going to build, there are many different sizes of solar panel to choose, If you are looking for a portable solar panel, why not look at this small solar panel that we are going to introduce today-----0.5W Solar Panel 55x77.
0.5W Solar Panel 55x77 is monocrystalline silicon solar panel, which is the main trend in the future. Comparing to polycrystalline silicon solar panel and thin-film solar panel, monocrystalline silicon solar panel performs higher conversion rate that up to 17%. The surface is covered by fine resin which makes it waterproof, together with a very sturdy back, it is really suitable for outdoor environment.
Depending on light intensity, the typical open circuit voltage is 5V. If you take it to a summer day with bright sunshine and no cloud in the sky, the peal OC voltage can be up to 10V. Because the voltage range is relatively wide, if you are going to use boards that require narrow range of input voltage, such as Lipo Rider, to prevent any damage, please check whether the OC voltage is acceptable for the board before any connection.
To begin with, we recommend you to choose some of the solar panel compatible board produced by Seeed such as Seeeduino microcontroller series,Lipo Rider charging board seriesandXbee Carrier WSN products series. Since A 2mm JST connector is attached to the panel, it is perfect to team up with the boards that recommended above.
Despite all the goof features, it is really a very cheap solar panel among solar panel kits. Again, if you are looking for portable solar panels for sale, 0.5W Solar Panel 55x77 is the best choice!
Features
Dimensions: 70x55x3(±0.2) mm
Typical voltage: 5.5V
Typical current: 100mA
Open-circuit voltage: 8.2 V
Maximum load voltage: 6.4V
Technical Details
| Weight | G.W 20g |
| Battery | Exclude |
Part List
| 0.5W Solar Panel 55x70 | 1 |
