LiPo Rider Pro 是一個專為 MCU 專案所設計的鋰電池充電管理和升壓電路的電源模組,並具備標準的 USB 輸出介面。採用綠色能源對你喜愛的電子套件充電!LiPo Rider 電路板能夠讓你利用太陽能來驅動你喜愛的 5V 裝置,無須撰寫任何程式!插上它就能動。內部的充電 IC 會處理所有元件之間的電力傳輸。
在太陽能不足的時候,你也可以透過 mini-USB 來對鋰電池充電。而且你不需要拔除 LiPo Rider Pro 電路板,就能夠與你的套件通訊或燒錄程式。
LiPo Rider Pro 能夠供應高負載(尖峰達到 1A),所以可以用來對你的行動電話充電。
資料來源:https://www.seeedstudio.com/LiPo-Rider-Pro-p-992.html
Power your favorite electronic kit with green energy! The LiPo Rider Pro is an enhancement of LiPo Rider. It can supply higher load output than LiPo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favorite 5V device. The LiPo Rider Pro board is the ideal green power solution for your outdoor sensor design. Attach the LiPo Rider Pro board to your sensor board and it can run on solar power forever! It can also be used to charge mobile phone.
The LiPo Rider Pro is extremely affordable and easy to use. No programming is required. Plug it in and it works. The internal charger IC handles all the power flow between the various components.
In case solar power is not sufficient, the mini USB port allows you to charge your lithium battery through USB. It can also be used to program your kit without detaching the LiPo Rider Pro board.
Features
Battery and Solar panel connector is JST 2.0
Stable 5V USB power supply regardless of source
Charge/Recharge algorithms built into chip
Charge Lithium Polymer Battery through solar power or USB
Stable supply voltage through either lithium battery or USB
2 x USB ports let you program your kit while charging your Lithium battery
LED indications for battery full or charging states
4 green LED indicates quantity of electricity of lithium battery
Dimensions | 115mm x 15mm x 25mm |
Weight | G.W 41g |
Battery | Exclude |
Solar input voltage | 4.8V~6.5V |
Charging Current | 400mA~600mA |
Maximum Output Current | 1A |
Battery input voltage | 4.2V |
USB input voltage | 5V |
USB output voltage | 5V |
LiPo Rider Pro | 1 |
資料來源:http://www.seeedstudio.com/wiki/index.php?title=Lipo_Rider_Pro
Power your favourite electronic kit with green energy! The LiPo Rider Pro is a promotion of Lipo Rider.It supply heavier load output(1A peak) than Lipo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favourite 5V device. The LiPo Rider Pro board is the ideal green power solution for your outdoor sensor design. Attach the LiPo Rider Pro board to your sensor board and it can run on solar power forever! It can also be used to charge mobile phone.
The LiPo Rider Pro is extremely affordable and easy to use. No programming is required. Plug it in and it works. The internal charger IC handles all the power flow between the various components.
In case solar power is not sufficient, the mini USB port allows you to charge your lithium battery through USB. It can also be used to program your kit without detaching the LiPo Rider Pro board.
The LiPo Rider Pro can be purchased as a separate board or as a kit (LiPo Rider Pro + Lithium Battery + Solar Panel) from Seeed Studio.
Model:POW12059P
The dimensions of LiPo Rider Pro is like the 6A Lithium Polymer Battery
Items | Min | Norm | Max |
---|---|---|---|
Vin Solar | 4.8V | 5.0V | 6.5V(10s) |
Icharge (RIset=3.9kΩ) | 400mA | 500mA | 600mA |
Iload | 0mA | 1000mA | |
Vbatt(Rx=0Ω) | 4.2V | ||
Vsource USB | 5.0V | ||
Vdestination USB | 5.0V |
CH pin level(Red LED state) | OK pin level(Green LED state) | Statements |
---|---|---|
low level(on) | high level(off) | Charging |
high level(off) | low level(last on) | Complete |
pulse signal(flash) | pulse signal(on) | The battery isn't exist |
high level(off) | high level(off) | Two situations :
|
The LiPo Rider Pro has four LED battery indicators like the cell phone,and you can see the battery power by just pressing the button K2 like below:
LED battery indicator parameter
Numbers of lighting up | Quantity of electricity |
---|---|
4 | 90~100% |
3 | 60~90% |
2 | 30~60% |
1 | 10~30% |
0 | 0~10% |
One important application of the Lipo Rider Pro board is as an affordable power supply for outdoor sensors. The outdoor sensor device will be powered by the lithium battery supplemented by the solar panel. Please note that it is not recommended to run the outdoor sensor ONLY on solar power, as this may vary during the day and may cause the sensor to reset / power down unexpectedly. In this case, the device is running in “USB Mode”.
If a firmware reprogram for the outdoor sensor device is required, simple connect the mini USB port to your PC which will put the device under “Program Mode” as explained above.
Larger/multiple batteries and/or solar panels can be used, but only with end-user modifications.
Please list your question here:
If you have questions or other better design ideas, you can go to our forum or wish to discuss.
Revision | Descriptions | Date |
---|---|---|
Lipo Rider Pro v0.9b | Initial public release | Sept 20, 2011 |
The Additional Idea is the place to write your project ideas about this product, or other usages you've found. Or you can write them on Projects page.
Click here to buy Lipo Rider ,or other products you like.
This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.
Links to external webpages which provide more application ideas, documents/datasheet or software libraries