資料來源:https://www.seeedstudio.com/Grove---Relay-p-769.html
The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED will light up and the relay will close allowing current to flow. The peak voltage capability is 250V at 10 amps.
Please exercise great care when working with mains voltages— if in doubt contact a professional such as a licensed electrician for help.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting StartedandIntroduction to Grove before your using of the product.
Dimensions | 42mm x 24mm x 18.5mm |
Weight | G.W 19g |
Battery | Exclude |
Grove - Relay | 1 |
User Guide | 1 |
The Grove-Relay module is a digital normally-open switch. Through it, you can control circuit of high voltage with low voltage, say 5V on the controller. There is an indicator LED on the board, which will light up when the controlled terminals get closed.
Make a cool router and also a printer at the same time