317010006 Smart Wireless Charger Transmitter -

原名

貨號

317010006

分類

Power Supply

特價

商品停售

由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。

資料來源：https://www.seeedstudio.com/Smart-Wireless-Charger-Transmitter---5V%260.6A-p-2265.html

Description

This product is mainly a combination of the M268 and PIC100 two main chip integrated oscillation circuit shaping circuit detection circuit frequency interference suppression circuit. Wireless transmitter tubes and other functions, the input voltage 9-12V, wireless transmission of electrical energy is dedicated chipset, with power, standby current, high efficiency , low temperature, small size and other characteristics, the electromagnetic wave frequency control in 150KHZ below , and medical frequency equivalent to the human body and other electrical appliances without any harm or interfere with , the use of electromagnetic induction principle achieve energy conversion and transmission efficiency up to 80% , is the highest performance wireless power transmission , most secure wireless module , MP268 wireless charging chips are widely used in gaming peripheral products charger (wii controller battery , PS3 controller battery , XBOX360 handle battery , NDSi NDSL battery battery ) , consumer electronics ( electric shavers, electric toothbrushes , LED flashlight , electronic waterproof lights, waterproof mobile phone , electronic candles , magnetic products ) , digital products ( mobile phone charger , iPhone chargers , MP3, MP4, speaker, ) and other applications.

Features:

Smart charging detection operator dedicated , fully equipped automatically enter standby mode , more energy secure.
Low standby power consumption, high conversion efficiency when a large current low temperature, can transport up to 500MA over wireless high current charging .
Transmitting and receiving custom designed with magnetic isolation raise efficiency across disk, to enhance the energy conversion efficiency.
12bits using high-precision AD.
Fully charged battery is high, more than 95%.
A full range of technical support and personalized solutions specifically tailored to increase the intelligent peripheral management functions.
Multi-strand copper induction coil to provide a more secure , stable and efficient wireless power characteristics of low temperature.

Specification:

In put voltage：DC 10-12 V
standby current：20-40mA
Output voltage：DC 5 V
output current：rated：600MA MAX：1000MA
Power output：rated：3W MAX>5W
Center resonance frequency：125KHz
Transmit-receive distance：2-6mm (best distance 3－4mm)

Technical Details

Dimensions	75mm x 55mm x 29mm
Weight	G.W 19g
Battery	Exclude

描述

該產品是主要的M268和PIC100兩個主要芯片集成振盪電路整形電路檢測電路頻干擾抑制電路的組合。無線發射管等功能，輸入電壓9-12V，電能的無線傳輸在150KHZ的專用芯片組，具有功率大，待機電流，效率高，溫度低，體積小等特點，電磁波頻率控件的下方，和醫療頻率等同於人體和其他電器沒有任何傷害或干擾，利用電磁感應原理實現能量轉換和傳輸效率高達80％，是性能最高的無線電力傳輸，最安全的無線模塊，MP268無線充電芯片被廣泛應用於遊戲周邊產品充電（Wii手柄電池，PS3手柄電池，XBOX360手柄電池，NDSi的NDSL電池電池），消費電子（電動剃須刀，電動牙刷，LED手電筒，電子防水燈，防水手機，電子蠟燭，磁性製品），數碼產品（手機充電器，iPhone充電器，MP3，MP4，音箱，）和其他應用程序。

特徵：

智能充電檢測算敬業，設備齊全自動進入待機狀態，更節能安全。
低待機功耗，轉換效率高，當大電流溫度低，還可以通過無線大電流充電傳輸高達500mA。
發送和接收定制設計與整個磁盤的磁隔離加註效率，以提高能量轉換效率。
採用高精度12位AD。
充滿電的電池高，95％以上。
技術支持和個性化解決方案全系列專門為增加智能外設管理功能。
多股銅芯電感線圈提供低溫更安全，穩定，高效的無線功率特性。

規範：

在放電壓：DC 10-12 V
待機電流：20-40mA
輸出電壓：DC 5伏
輸出電流：額定：600MA MAX：1000MA
輸出功率：額定：3W MAX> 5W
中心共振頻率：125KHz的
發射接收距離：2-6mm（最佳距離在3-4mm）