資料來源:https://www.seeedstudio.com/Solar-Charger-Shield-v2.2-p-2391.html
The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit. The maximum current provided by the board can get up to 600mA. An usb connector is also useful to charge the battery.
Features:
Output Disconnect
Short circuit protection
3W Output Power when connecting battery
Continuous Charge Current Up to 900mA
Battery status indication ( Red : Charging , Green: Charged )
Micro-USB Connector
Specification:
Battery input voltage: 3.0~4.5V
USB input voltage: 4.75~5.25V
Solar input voltage: 4.8~6V
Maximum Output Power(with battery): 3W(600mA@5V)
Ripple voltage:<100mV @ 500mA
Dimensions: 68*53mm
Dimensions | 115mm x 75mm x 25mm |
Weight | G.W 42.5g |
Battery | Exclude |
Solar Charger Shield v2.2 | 1 |
太陽能充電器是一個可堆疊的盾牌, 以 Arduino 相容的平臺, 使自我調整電池功率和作為能量收割機的現場充電。您可以使用各種電池的電壓 3.0V-4.2V, 以轉移5V 輸出, 或把鋰離子電池和太陽能電池板, 形成一個自主的感應器單位。董事會提供的最大電流可以達到600mA。usb 連接器對電池充電也很有用。
功能:
輸出斷開
短路保護
3W 連接電池時輸出功率
連續充電電流高達900mA
電池狀態指示 (紅色: 充電, 綠色: 帶電)
微型 USB 連接器
規範:
電池輸入電壓: 3.0 ~ 4.5V
USB 輸入電壓: 4.75 ~ 5.25V
太陽能輸入電壓: 4.8 ~ 6 v
最大輸出功率 (帶電池): 3 w (600mA@5V)
波紋電壓: < 100mV @ 500mA
尺寸:68 * 53 mm
檔:
有關此產品的更多資訊, 請訪問我們的wiki頁面。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。對於技術支援, 請將您的問題張貼到 ourforum。