XBee-PRO 802.15.4 OEM RF modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
XBee-PRO modules are power-amplified versions of XBee modules for extended-range applications. Part of the XBee family of RF products, these modules are easy-to-use, share a common footprint, and are fully interoperable with other XBee products utilizing the same technology. Module users have the ability to substitute one XBee module for another with minimal development time and risk.
FEATURES
• No configuration needed for out-of-the-box RF communications
• Common XBee footprint for a variety of RF modules
• Fast 250 kbps RF data rate to the end node
• 2.4 GHz for worldwide deployment
• Sleep modes supported for extended battery life
SPECIFICATION
• Power output: 63 mW (+18 dBm) North American version ,10 mW (+10 dBm) International version
• Indoor/Urban range: Up to 300 ft (90 m)
• Outdoor/RF line-of-sight range: Up to 1 mile (1.6 km) RF LOS
• Receiver sensitivity: -100 dBm (all variants)
• RF data rate: 250 Kbps
• Operating frequency: 2.4 GHz
• Interface data rate: Up to 115.2 Kbps
• Networking:
• Spread spectrum typ: DSSS (Direct Sequence Spread Spectrum)
• Supported network topologies: Point-to-point, point-to-multipoint, & peer-to-peer
• Error handling: Retries & acknowledgements
• Filtration options: PAN ID, Channel, and 64-bit addresses
• Channel capacity: 12 Channels
• Addressing: 65,000 network addresses available for each channel
• Power:
• Supply voltage: 2.8 - 3.4 VDC,XBee Footprint Recommendation: 3.0 - 3.4 VDC
• Transmit current: 215 mA (@ 3.3 V)
• Receive current : 55 mA (@ 3.3 V)
• Power-down sleep current:<10 µA at 25° C
• General:
• Frequency band: 2.4000 - 2.4835 GHz
• Interface options: 3V CMOS UART
• Physical Properties:
• Size: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
• Weight: 0.10 oz (3g)
• Antenna options: U.FL, Reverse Polarity SMA (RPSMA), chip antenna or wired whip antenna
• Operating temperature: -40° C to 85° C (industrial)
Dimensions | 50mm x 70mm x 7.7mm |
Weight | G.W 4g |
Battery | Exclude |
Xbee Pro IEEE 802.15.4 2.4Ghz 63mW 250Kbps RF Module | 1 |
的XBee-PRO 802.15.4 OEM射頻模塊嵌入到設備提供無線端點連接解決方案。這些模塊用於快速點對多點或對等網絡的IEEE 802.15.4網絡協議。它們是專為需要低延遲和可預測的通信時間高通量應用。
的XBee-PRO模塊是的XBee模塊擴展範圍應用功率放大版本。該系列的XBee射頻產品的一部分,這些模塊易於使用的,都有一個共同的足跡,並與利用相同的技術等的XBee產品完全的互操作性。模塊用戶可以替代1的XBee模塊,另一個以最小的開發時間和風險的能力。
特徵
規範