官方授權台灣代理分銷

EMW3166 WiFi模塊(外部IPEX天線)

原名
EMW3166 WiFi Module(External IPEX antenna)

貨號
113990417

分類
Wifi

特價
391

SeeedStudio 採購說明

本項商品目前在台灣無庫存,將採用空運方式進口再出貨。加計下單日期、報關手續及運送時程,預計大約 10 - 15 天內可以出貨給您。

我們將在您下單當日向 SeeedStudio 原廠確認庫存狀況,並且寄發接受訂單確認通知給您。

資料來源:https://www.seeedstudio.com/EMW3166-WiFi-Module%28External-IPEX-antenna%29-p-2911.html

Description

EMW3166 is one embedded Wi-Fi module of low-power, small-size and low-cost designed by MXCHIP. It integrates one Cortex-M4 microcontroller of 256Kbytes SRAM and 1Mbytes on-chip flash with another 2Mbytes on-board SPI flash added. Various peripheral interfaces of analog and digital are available. The power supply voltage is 3.3V. It applies half-hole footprint for hand-soldering. The module runs MICO, which is the IOT OS System of MXCHIP, and is available for secondary development. The TCP/IP protocols and security encryption algorithm could be applied in various Wi-Fi applications. In addition, several particular firmware prepares for some typical applications, like UART to Wi-Fi DTU, easylink configuration and services for cloud interfacing.


Feature

Properties

  • Integration of one Cortex-M4 MCU and one RF chip of 802.11 b/g/n

  • Cortex-M4 core at 100MHz

  • 2M bytes on-board SPI flash and 1M bytes on-chip flash

  • 256K bytes SRAM

Operation voltage

  • Low voltage mode: 2.3~3.0V

  • Normal voltage mode: 3~3.6V

Peripherals

  • 25 GPIOS

  • JTAG/SWD debug interfaces

  • Wi-Fi connectivity:

  • 802.11 b/g/n available

  • WEP, WPA/WPA2, PSK available

  • 16.5dBm@802.11b, 14.5dBm@802.11g, 13.5dBm@802.11n

  • Receiver Sensitivity: -87dBm

  • Station, Soft AP and Wi-Fi Direct

  • Easylink available

  • On-board PCB antenna 

  • CE, FCC compliant

Operation Temperature

  •  -30°C~+85°C

Application scenarios

  • Auto electronics

  • Point of Sale system

  • Industrial automation systems

  • Medical/Health care

  • Smart home appliances

  • Smart LED


描述

EMW3166是MXCHIP設計的一款低功耗,小尺寸,低成本的嵌入式Wi-Fi模塊。它集成了一個256Kbytes SRAM和1Mbytes片上閃存的Cortex-M4微控制器,另外增加了2Mbytes板上SPI閃存。模擬和數字的各種外圍接口可用。電源電壓為3.3V。它適用於手工焊接的半孔足跡。該模塊運行MICO,它是MXCHIP的IOT OS系統,可用於二次開發。 TCP / IP協議和安全加密算法可以應用於各種Wi-Fi應用。此外,幾種特定的固件可以為某些典型應用程序做準備,如UART到Wi-Fi DTU,easylink配置和雲接口服務。


特徵

屬性

  • 集成了一個Cortex-M4 MCU和一個802.11 b / g / n的射頻芯片

  • Cortex-M4內核在100MHz

  • 2M字節板載SPI閃存和1M字節片上閃存

  • 256K字節SRAM

工作電壓

  • 低電壓模式:2.3〜3.0V

  • 正常電壓模式:3〜3.6V

外設

  • 25 GPIOS

  • JTAG / SWD調試接口

  • Wi-Fi連接:

  • 802.11 b / g / n可用

  • WEP,WPA / WPA2,PSK可用

  • 16.5dBm@802.11b,14.5dBm@802.11g,13.5dBm@802.11n

  • 接收靈敏度:-87dBm

  • 站,軟AP和Wi-Fi直接

  • Easylink可用

  • 板載PCB天線

  • CE,FCC兼容

工作溫度

  • -30℃〜+ 85℃

應用場景

  • 汽車電子

  • 銷售點系統

  • 工業自動化系統

  • 醫療保健

  • 智能家電

  • 智能LED


前往
現貨型錄

Line share