資料來源:https://www.seeedstudio.com/3.6V-Micro-Hydro-Generator-Pro-p-1280.html
This G1/2 micro hydro generator provides you clean and renewable electricity. With the help of the regulator circuit inside, the output of this generator is stable at 3.6V. And the capacity of battery is improved from 300mAh to 700mAh compared to the old version.
Time to replace the Li-po batteries in your waterside projects with the green and more accessible hydro power.
Features
Built-in Lithium Battery
Built-in Lipo Charging Circuit
Stabilized Voltage Ouput
High Battery Capacity
Specification
Working Pressure: < 2KGF
Pressure Drop: 0.4 Bar (3.0 L / Min )
Peak Current: 1.4 A
Stand-by Current: Max. 1.4A
Voltage Output: 3.6VDC --- 700mAh
Power Output: 125mW (4LPM)
Battery Capacity: 700mAh
Max. Flow: 20 L / Min ( 2KGF)
Water-resistance: IP4
High limited voltage: 4.3VDC
Dimensions: L 84.5 mm - W 64.5 mm - H 81 mm
Wire Length: 84 mm
Jack Type: JWT C2521 Terminal Plug
Connect Thread Gauge: G 1/2"
Weight: 195 ± 5g
Burst Pressure: 20KGF
Normal Operation Temp. 4 °C~80 °C
Max. Intermittent Operating Temp. 110 °C max. 30 min
Generating Model: NACuM Core (PAT NO.DE202006004800)
Battery Type: Li-polymer Battery with PCM
Documents
Dimensions | 82.7mm x 46mm x 65mm |
Weight | G.W 227g |
Battery | Lithium Cells / Batteries contained in equipment UN3481 - PI967 |
這G1 / 2微型水輪發電機為您提供清潔,可再生能源發電。與內部的調節器電路的幫助下,本發電機的輸出是在3.6V穩定。和電池的容量是相對於舊版本從300毫安時到700mAh的改善。
時間與綠色和更容易獲得水電的水邊項目更換鋰聚合物電池。
特徵
內置鋰電池
內置鋰聚合物充電電路
穩壓輸出繼電器
高電池容量
規範
工作壓力:<2KGF
壓降:0.4巴(3.0升/分鐘)
峰值電流:1.4 A
待機電流:最大。 1.4A
電壓輸出:3.6VDC --- 700mAh的
輸出功率:為125mW(4LPM)
電池容量:700mAh的
最大。流量:20升/分鐘(2KGF)
耐水性:IP4
高限制電壓:4.3VDC
外形尺寸:L84.5毫米-含64.5毫米- ^ h81毫米
線長:84毫米
插孔類型:JWT C2521終端插頭
連接螺紋量規:G 1/2“
重量:195&plusmn; 5克
爆破壓力:為20kgf
正常工作溫度。 4度; C〜80度;Ç
最大。間歇工作溫度。 110度; C最大值。 30分鐘
發電機型號:NACuM核心(PAT NO.DE202006004800)
電池類型:PCM的鋰聚合物電池
DOCUMENTS