官方授權台灣代理分銷

微型 NFC 板

原名
Micro NFC Board

貨號
114990147

分類
RFID&NFC

特價
2,443

資料來源:https://www.seeedstudio.com/Micro-NFC-Board-p-2431.html

Description

Micro NFC Board from App Near Me Ltd is the perfect prototyping solution for NFC applications. It is shipped with an easy to use library enabling the following features:

  • NFC tag reading and writing

  • Android beam (P2P/SNEP)

  • Dynamic tag emulation

 

It can be used as a peripheral with any PC/Raspberry Pi (Python API) or microcontroller (Arduino and mbed libraries)

It is also mbed-enabled and the embedded ARM microcontroller can be reprogrammed using the mbed tools.

Additionally it can be used with the free AppNearMe app to easily control the board in real time.

Features:

  • NFC

    • Tag reading

    • Tag writing

    • Android beam (P2P/SNEP)

    • Tag emulation


  • NXP LPC11U34FHN33/421 MCU

    • 48MHz, 10KB RAM, 48KB FLASH, 4KB EEPROM

    • USB Device, SPI, I2C, UART, 4xADC, GPIO


  • Prototyping form-factor

    • 20-pin 0.1" pitch DIP package, 35x100mm

    • Splittable antenna

    • 5V USB, 3.6-6V or 3.3V supply

    • Built-in USB drag 'n' drop FLASH programmer

    • Reset and bootloader enable push-buttons

    • 2 LEDs on board


  • mbed.org Developer Website

    • Lightweight Online Compiler

    • High-level C/C++ SDK

    • Cookbook of published libraries and projects

 

Part List:

MicroNFCBoard X 1

Resources:

 

For technical support and suggestions, please visit our forum.


Technical Details

Dimensions 120mm x 75mm x 3mm
Weight G.W 17g    
Battery Exclude

Part List

Micro NFC Board 1

描述

微 nfc 板從應用程式附近的我公司是完美的原型解決方案的 nfc 應用。它附帶一個便於使用的庫, 啟用以下功能:

  • NFC 標籤讀寫

  • Android 光束 (P2P/SNEP)

  • 動態標記模擬

 

它可以用作任何 PC/覆盆子 Pi (Python API) 或微控制器 (Arduino 和 mbed 庫) 的外設

它也 mbed 啟用和嵌入式 ARM 微控制器可以重新程式設計使用 mbed 工具。

此外, 它可以使用免費的 AppNearMe 應用程式, 以方便即時控制板。

功能:

  • nfc

    • 標籤讀取

    • 標記寫入

    • Android 光束 (P2P/SNEP)

    • 標記模擬


  • NXP LPC11U34FHN33/421 單片機

    • 48MHz、10KB RAM、48KB 快閃記憶體、4KB EEPROM

    • USB 設備, SPI, I2C, UART, 4xADC, GPIO


  • 原型形成因素

    • 20針 0.1 "瀝青 DIP 包, 35x100mm

    • 可天線

    • 5V USB, 3.6-6 v 或3.3V 電源

    • 內置 USB 拖動 "n" 滴 FLASH 程式師

    • 重置和引導程式啟用按鍵

    • 2指示燈在船上


  • mbed.org開發人員網站

    • 羽量級線上編譯器

    • 高級 c/c++ SDK

    • 出版的圖書館和專案的食譜

 

部件清單:

MicroNFCBoard X 1

資源:

 

有關技術支援和建議, 請訪問我們的論壇

技術細節

尺寸120mm x 75mm x 3mm
重量G. W 17g
電池排除

部件清單

微型 NFC 板1

前往
現貨型錄

Line share