資料來源:https://www.seeedstudio.com/LiPo-Rider-Pro-p-992.html
Power your favorite electronic kit with green energy! The LiPo Rider Pro is an enhancement of LiPo Rider. It can supply higher load output than LiPo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favorite 5V device. The LiPo Rider Pro board is the ideal green power solution for your outdoor sensor design. Attach the LiPo Rider Pro board to your sensor board and it can run on solar power forever! It can also be used to charge mobile phone.
The LiPo Rider Pro is extremely affordable and easy to use. No programming is required. Plug it in and it works. The internal charger IC handles all the power flow between the various components.
In case solar power is not sufficient, the mini USB port allows you to charge your lithium battery through USB. It can also be used to program your kit without detaching the LiPo Rider Pro board.
Features
Battery and Solar panel connector is JST 2.0
Stable 5V USB power supply regardless of source
Charge/Recharge algorithms built into chip
Charge Lithium Polymer Battery through solar power or USB
Stable supply voltage through either lithium battery or USB
2 x USB ports let you program your kit while charging your Lithium battery
LED indications for battery full or charging states
4 green LED indicates quantity of electricity of lithium battery
Dimensions | 115mm x 15mm x 25mm |
Weight | G.W 41g |
Battery | Exclude |
Solar input voltage | 4.8V~6.5V |
Charging Current | 400mA~600mA |
Maximum Output Current | 1A |
Battery input voltage | 4.2V |
USB input voltage | 5V |
USB output voltage | 5V |
LiPo Rider Pro | 1 |
使用綠色能源為您最喜愛的電子套件供電!脂車手 Pro 是增強脂騎手。它能提供比脂騎手更高的負荷輸出。脂肪車手 Pro 板允許您乘坐的太陽波運行您最喜愛的5V 設備。脂肪車手 Pro 板是理想的綠色電源解決方案, 為您的戶外感應器設計。附加脂肪車手 Pro 板到您的感應器板, 它可以運行在太陽能永遠!它也可以用來充電手機.
脂肪騎手 Pro 是非常實惠和便於使用。不需要程式設計。插入它, 它的工作原理。內部充電器 IC 處理各種元件之間的所有功率流。
如果太陽能發電不足, 迷你 usb 埠允許您通過 usb 充電您的鋰電池。它也可以用來程式設計你的套件不分離的脂車手 Pro 板。
功能
電池和太陽能電池板連接器是 JST 2。0
穩定的 5V USB 電源, 無論源
內置晶片的充電/充電演算法
充電鋰聚合物電池通過太陽能或 USB
通過鋰電池或 USB 穩定供電電壓
2 x USB 埠, 讓您程式您的套件, 而充電您的鋰電池
電池滿或充電狀態指示
4綠色 LED 顯示鋰電池計量
尺寸 | 115mm x 15mm x 25mm |
重量 | G. W 41g |
電池 | 排除 |
太陽能輸入電壓 | 4.8V ~ 6.5V |
充電電流 | 400毫安培 ~ 600 毫安培 |
最大輸出電流 | 1A |
電池輸入電壓 | 4.2V |
USB 輸入電壓 | 5V |
USB 輸出電壓 | 5V |
脂肪車手 Pro | 1 |