資料來源:https://www.seeedstudio.com/Lipo-Rider-v1.3-p-2403.html
Lipo Rider is a power module with Lipo battery charge management and boost circuit designed for MCU projects with standard USB output interface. It is extremely affordable and easy to use. No programming is required. Plug it in and it works. The internal charger IC handles all the power flow between the various components.
FEATURES
Jst 2.0 connector
Stable 5V USB power supply regardless of source
Charge/Recharge algorithms built into chip
Charge Lithium Polymer Battery through solar power or USB
Stable supply voltage through either lithium battery or USB
2 x USB ports let you program your kit while charging your Lithium battery
LED indications for battery full or charging states
Simple design means extremely affordable
Scalable to multiple lithium batteries and large/multiple solar panels through simple end-user modifications
SPECIFICATION
Small Footprint – Dimensions = L42 × W34 × D6.8
900mA maximum charging current for Lithium battery
600mA maximum supply current from Lithium battery
Power diodes to prevent back feed from USB device into Lipo battery
Dimensions | 130mm x 90mm x 8.7mm |
Weight | G.W 10g |
Battery | Exclude |
Lipo Rider V1.3 | 1 |
脂車手是一個電源模組與脂電池充電管理和升壓電路設計的單片機專案與標準的 USB 輸出介面。它是非常實惠和便於使用。不需要程式設計。插入它, 它的工作原理。內部充電器 IC 處理各種元件之間的所有功率流。
功能
Jst 2.0 連接器
穩定的 5V USB 電源, 無論源
內置晶片的充電/充電演算法
充電鋰聚合物電池通過太陽能或 USB
通過鋰電池或 USB 穩定供電電壓
2 x USB 埠, 讓您程式您的套件, 而充電您的鋰電池
電池滿或充電狀態指示
簡單的設計意味著非常實惠
可擴展到多個鋰電池和大型/多個太陽能電池板通過簡單的最終使用者修改
規範
小腳印-尺寸 = L42 x W34 x D6。8
900mA 鋰電池最大充電電流
600mA 鋰電池最大供電電流
電源二極體防止從 USB 設備回饋到脂電池
檔
請訪問我們wiki頁面以瞭解有關此產品的更多資訊。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。有關技術支援, 請將您的問題張貼到論壇.