官方授權台灣代理分銷
SODAQ - 微控制器太陽能數據採集
原名
SODAQ - Microcontroller for Solar Data Acquisition
貨號
103990027
分類
Accessories for Ham Radio & Instruments
特價
1,699
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/SODAQ---Microcontroller-for-Solar-Data-Acquisition-p-1735.html
Description
This product is discontinued, please consider the upgraded SODAQ Mbili as an alternative product.
The SODAQ (Solar Data Acquisition) is an Arduino compatible data acquisition board designed by Gregory Knauff.
The SODAQ is a multi-feature microcontroller board that lets you connect sensors and devices to the internet, quickly and with no fuss. It's designed for connecting things efficiently, running off-grid with built-in, ready-to-go solar power. You can connect a LiPo battery and a solar panel and keep it gathering sensor data without having to charge it.
The board has built in sockets for Grove modules; a realtime clock; extended flash memory; USB on-board; and the Bee socket can take any WiFi/RF/XBee or other compatible plugin for communications like our GPRS module (www.gprsbee.com).
The SODAQ is based on the Atmega328P micocontroller, which comes with the Arduino bootloader. The microcontroller runs on 3.3V at 8MHz and is programmable through USB (Which is connected with the on-board FTDI-chip). For examples to get started, you can check out the website www.sodaq.net.
Specifications
- Atmega328P Microcontroller running at 3.3V and 8MHz
- Compatible with the Arduino platform
- Power supply by LiPo battery (3.7V) or USB cable (5V)
- Solar charge controller with JST connector for Solar Panel up to 2.5W
- Battery Monitor
- DS3231 Real Time Clock and Temperature sensor, RTC backup powered by LiPo battery
- 16 MBit data flash module (AT45DB)
- Mini USB connector
- 12 Grove connectors connecting Digital, Analog and I2C pins (Switched or always on)
- On/Off switch. With the switch in Off position the solar charge circuit is still active and the RTC clock is still powered.
- ICSP programming header
- Bee socket for Xbee, GPRSbee or other bee style modules
- Same size as Raspberry Pi
該產品停產，請考慮升級SODAQ Mbili作為替代產品。
該SODAQ（太陽能數據採集）是一個Arduino兼容的數據採集板由格雷戈里Knauff設計。
該SODAQ是一個多功能的微控制器板，讓您的傳感器和設備連接到互聯網，快速和沒有什麼大驚小怪的。它被設計用於高效連接的東西，用內置的，隨時可以去太陽能發電運行離網。您可以將鋰聚合物電池和太陽能電池板，並保持它收集傳感器數據，而無需充電。
董事會已建成插座格羅夫模塊;一個實時時鐘;擴展閃存; USB板載;而蜜蜂插座可以採取像我們的GPRS模塊通信的任何WiFi / RF /的XBee或其他兼容的插件（ www.gprsbee.com ）。
該SODAQ是基於ATMEGA328P micocontroller，來與Arduino的引導程序。微控制器在3.3V為8MHz運行，是可編程通過USB（與板載FTDI芯片連接）。對於上手的例子，你可以查看該網站www.sodaq.net 。
產品規格
- ATMEGA328P微控制器在3.3V和運行為8MHz
- 與Arduino的平台兼容
- 由鋰聚合物電池（3.7V）或USB電纜供電（5V）
- 與JST連接器，用於太陽能電池板高達2.5W太陽能充電控制器
- 電池監視器
- DS3231實時時鐘和溫度傳感器，RTC備用供電由鋰聚合物電池
- 16兆位數據閃存模塊（AT45DB）
- 迷你USB連接器
- 12格羅夫接口連接數字，模擬和I2C引腳（接通或總是）
- 開/關。在關閉位置開關的太陽能充電電路仍然活躍，RTC時鐘仍然通電。
- ICSP編程頭
- 蜜蜂插座的XBee，GPRSbee或其他蜜蜂風格模塊
- 同樣大小的樹莓派
