官方授權台灣代理分銷
汽車之盾
原名
Motor Shield
貨號
103030012
分類
Accessories for Ham Radio & Instruments
特價
869
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/Motor-Shield-p-913.html
Description
This product was replaced by a updated version Motor Shield V2.0 (SLD01102P).
Motor Shield V2
The Motor Shield is a perfect platform for robotics and mechanical applications. It enables the Arduino to drive two brushed DC motors or one 4-wire two-phase stepper motor. Based on the H-bridge driver Chip L298N motor driver integrated circuit, it requires a 6V to 15V power supply to power the motor and also includes an on-board 5V voltage regulator for powering the main Arduino board. Additional plug and play Grove sensors can be connected to the 13 on-board Grove connectors.
Features
- Standard Arduino compatible
- Pulse-width modulated speed control mode
- 4 direction indicator lights
- Compatible with Grove plug and play sensors
- Extra large heat sink helps handle big loads
CAUTION:
The Driver IC and Heat sink may become very hot when working with current more than 1000mA.
Specifications
Item |
Min |
Typical |
Max |
Unit |
Logic Control Voltage |
4.5 |
5 |
5.5 |
V |
Motor Supply Voltage |
6 |
/ |
15 |
V |
Output Voltage |
0 |
/ |
Vinput -1 |
V |
Output Current( For Each Channel) |
/ |
/ |
2000 * |
mA |
Output Duty range |
0%~100% |
/ |
||
Dimension |
68.5x54.5x29.5 |
mm |
||
Net Weight |
37 |
g |
||
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Documents
描述
本產品是由更新的版本替換電機盾V2.0（SLD01102P） 。
電機盾V2
電機盾是機器人和機械應用的理想平台。它使Arduino的驅動兩個有刷直流電機或者一個4線兩相步進電機。基於H橋驅動器芯片L298N電機驅動器集成電路上，它需要一個6V至15V電源向電動機供電，並且還包括一個板上5V電壓穩壓為主要Arduino板供電。附加即插即用樹叢傳感器可連接到13板載樹叢連接器。
特徵
- 標準的Arduino兼容
- 脈寬調製的速度控制模式
- 4方向指示燈
- 與格羅夫即插即用傳感器兼容
- 超大散熱片，有助於處理大負荷
警告：
與當前工作超過千毫安時，驅動IC和散熱器可能會變得很熱。
