官方授權台灣代理分銷
藍牙4.0低功耗 - BLEShieldV2.0
原名
Bluetooth 4.0 Low Energy - BLE Shield v2.0
貨號
102990035
分類
Accessories for Ham Radio & Instruments
特價
1,112
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/Bluetooth-4.0-Low-Energy---BLE-Shield-v2.0-p-1631.html
Description
This product is discontinued, please consider the upgraded BLE Shield v2.1 as an alternative product.
BLE Shield 2 stands for Bluetooth 4.0 Low Energy Shield version 2. It is designed to work with Arduino boards, including Arduino Uno, Mega 2560, Leonardo and Due. It allows you to connect your Arduino board with other BLE Central device like a smartphone or tablet.
Note: Headers of this product is shipped unsoldered.
Video Android:http://youtu.be/BCQsWGKu_Vw
Video iOS:http://youtu.be/x2pitBKHi3A
Requirement
- iOS 6 or 7: iPhone 5 (all models), iPhone 4S, iPad Air, iPad (3rd gen or later), iPad mini (all models) and iPod touch (5th gen or later)
- Android 4.3 devices with BLE hardware: Nexus 4, Nexus 7 and Samsung Note 3.
New features in version 2
- Besides the on-board PCB antenna, option to use SMA connector for external antenna (soldering is required)
- Flexible REQN and RDYN pins selectable from pin 2 to 12, these pins are fixed at 8 & 9 for BLE Shield v1
- Reset button also resets the Arduino board, and vice versa
- ICSP header provides Vcc (for other shields to get power source)
- 5. ICSP header now passes through (for other shields to connect to the SPI)
- 6. Shield's reset is controllable by Arduino pin 4 or 7
- 7. Reset signal to the shield is now active low (i.e. pull low to reset the shield)
- 8. Added test points for power consumption measurement of the nRF8001 chip (soldering is required)
- 9. Added circuitry and test pin (J9 NC) for measurement of instant working current (using logic analyzer, 1mA = 100mV).
Usage
- Control your Arduino pins with our/your own mobile App
- Send sensor data from your Arduino to an App for processing
- Use your iDevice as an internet gateway for your Arduino
- and much more!
Specification
- Nordic nRF8001 Bluetooth Low Energy connectivity IC
- Support Peripheral (Slave) role operation only - nRF8001 IC limitation
- Proprietary simple serial interface (ACI)
Here is the Tutorials for Getting Started with Seeeduino V3 and BLE Shield.
More information on http://redbearlab.com/bleshield/
該產品停產，請考慮升級BLE盾V2.1作為替代產品。
BLE盾牌2代表低功耗藍牙4.0版本盾2.它的設計與Arduino的主板，其中包括Arduino的烏諾，兆豐2560，萊昂納多和因工作。它可以讓你的Arduino板像一個智能手機或平板電腦等BLE中央設備連接。
注：本產品的頭出廠虛焊。
視頻Android版 ： http://youtu.be/BCQsWGKu_Vw
視頻的iOS： http://youtu.be/x2pitBKHi3A
需求
- 的iOS 6或7：iPhone 5的（所有型號），iPhone 4S，iPad的空氣，iPad的（第三代或更高版本），iPad的迷你（所有型號）和iPod touch（第5代或更高版本）
- Android 4.3的設備與硬件BLE：的Nexus 4和Nexus 7和三星注3。
在2版的新功能
- 除了板上PCB天線，選項以使用SMA連接器，外部天線（必須焊接）
- 靈活REQN和RDYN引腳可選擇從引腳2到12個，這些引腳被固定在第八，第九BLE盾牌V1
- 復位按鈕也復位Arduino板，反之亦然
- ICSP頭提供工作電壓（其它盾牌獲得電源）
- 5. ICSP頭現在通過（對於其他屏蔽連接到SPI）的
- 6.盾牌的復位是Arduino的引腳4或7可控
- 7.復位信號屏蔽現在為低電平有效（即拉低重置盾）
- 8.用於nRF8001芯片的功耗測量加測試點（必須焊接）
- 9.增加了電路和測試引腳（J9 NC）的即時測量工作電流（使用邏輯分析儀，1毫安= 100mV的）。
用法
- 我們/你自己的移動應用控制你的Arduino引腳
- 從你的Arduino發送傳感器數據的應用程序進行處理
- 用你的iDevice為您的Arduino的互聯網網關
- 以及更多！
規範
- 北歐的nRF8001藍牙低耗能連接IC
- 僅支持外圍設備（從）角色的操作 - nRF8001 IC限制
- 專有簡單的串行接口（ACI）
這裡是教程入門Seeeduino V3和BLE盾牌 。
有關更多信息， http://redbearlab.com/bleshield/
