資料來源:https://www.seeedstudio.com/Bluetooth-Shield-V2-p-2416.html
The Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with Arduino/Seeedstudio for transparent wireless serial communication.
Features
Seeeduino/Arduino compatible
Up to10m communication distance in house without obstacle
UART interface (TTL) with programmable baud rate
A full set of configuration commands
On board PCB Antenna
Based on HM-01 Bluetooth module
Dimensions | 100mm x 65mm x 30mm |
Weight | G.W 40g |
Battery | Exclude |
Power supply Voltage | 3.3V |
Baudrate | 9600, 19200, 38400, 57600, 115200, 230400, 460800 |
Default Baud rate | 9600, Data bits: 8, Stop bit: 1, Parity: No parity |
Default PINCODE | ”1234” |
Bluetooth version | v2.1+EDR |
Bluetooth Shield V2 | 1 |
尺寸 | 100mm x 65mm x 30mm |
重量 | G. W 39g |
電池 | 排除 |
供電電壓 | 3.3V |
波特 | 9600、19200、38400、57600、115200、230400、460800 |
預設串列傳輸速率 | 9600、資料位: 8, 停止位: 1, 同位: 無同位 |
預設 PINCODE | "1234" |
藍牙版本 | v2.1 + EDR |
藍牙防護 V2 | 1 |