現貨供應最新開發模組
UF0 - STM32F0 Cortex-M0, Arduino& Grove compatible Platform
- ARM-base 32-bit Cortex-M0 MCU with Low power consumption and high performance
- Up to 8K RAM and 64K ROM
- Capacitive touch sensor ,three Capacitive key in Android Style with more fun
- 7-24V DC wide range input, high efficiency and powerful power supply to hook up stronger device
- Arduino and Grove compatible with support for a rich set of third-party expansion boards
- Dual UART and I2C (Grove Interface) for expansion boards
代號
uf0
SKU 即原廠標號
102990172
原廠連結：http://www.seeedstudio.com/wiki/UF0模块
UF0 簡介
UF0 是一款基於ST意法半導體 32位ARM Cortex-M0內核STM32F051C8T6的開源硬件主板。同時兼容Arduino、Grove接口，使得模塊擴展更加方便；還擁有如TSC電容觸摸控制器、32位定時器和12位DAC等高級外設；
採用DC-DC Step-down 芯片，為系統和外接模塊、Shield板等配件提供高效穩定的電源。
UF0使用開源的Arduino IDE進行程序開發。其界面友好，語法簡單以及方便的程序下載方式，特別適合用戶快速上手或進行原型開發。
規格參數
環境搭建下載並解壓Arduino IDEArduino IDE 下載，下載解壓後可看到以下內容： 注意：Arduino IDE 需要arduino-1.5.5 或更高版本。 下載和安裝UF0支持包
git clone https://github.com/BestU/STM32_for_Arduino_BSP.git BestU 此時可在Arduino IDE的hardware目錄看到如下內容： BestU目錄包含以下內容： 開始使用UF0查詢UF0串口號
在Arduino IDE中選擇UF0在Arduino IDE中選擇UF0的串口現在可以使用Arduino IDE來開發您的UF0程序UF0示例 |
Description
What is UF0?
UF0 is all-in-one arduino-compatible prototyping platform powered by ST STM32F051C8T6 Cortex-M0. It also integrates with Seeed Studio grove 4-pin interface, which can be connected with major grove families, making prototype easier and faster. The TSC capacitive touch controller is the u
nique character for you to have fun with your finger, easy to control the sensors with the touch panel but not programming and it has 32bit timer and 12bit DAC,I2C, UART interfaces for extension.
Integrated with DC-DC Step-down power chip, it can provide highly efficient and stable power for the shields and other modules, especially suitable for those who want to build a product.
Arduino IDE for the software development, it makes your prototype start quickly. It supports Grove starter kit for Arduino from Seeedstudio perfectly .
Features:
Who’s UF0 For?
UF0 is open source for everyone who ever played or want to try arduino，grove，ST Cortex-M0 chipset , for smart device and practical manufacturable product development . It is for makers , electronic Enthusiast,engineers ,softwares and designers
Why We like it?
- ARM-base 32-bit Cortex-M0 MCU with Low power consumption and high performance
- Up to 8K RAM and 64K ROM
- Capacitive touch sensor ,three Capacitive key in Android Style with more fun
- 7-24V DC wide range input, high efficiency and powerful power supply to hook up stronger device
- Arduino and Grove compatible with support for a rich set of third-party expansion boards
- Dual UART and I2C (Grove Interface) for expansion boards
Specification
* Size L x W |
83.8 x 53.4mm |
* Processor |
ST STM32F051C8T6, 48MHz 32-bit ARM Cortex-M0 MCU |
* Memory |
8KB SRAM, 64KB Flash |
* Working Voltage |
3.3V |
* Input Voltage |
7V-24V |
* Output Voltage |
5V/2A 3.3V/500mA |
* Digital IO |
14个(6*PWM) |
* Analog Output |
6个(3.3V, 1 *DAC output) |
Documents
Please visit the wiki page for more info about this product.If you have any technical problem, please contact support [at] bestni.com
Discover More : we hope that you can discover more highlighs , discover and create more interest and practical prototype with groves ,arduino shields and others , you can post your technical issues and ideas on the forum ,we will discuss with you to build the dream.
For any technical support or suggestion, please kindly go to ourforum.
