進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
SparkFun nRF52832突圍
原名
SparkFun nRF52832 Breakout
貨號
WRL-13990
特價
658
資料來源：https://www.sparkfun.com/products/13990
The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flash, and 64kB RAM. And it’s half 2.4GHz multiprotocol radio, supporting Bluetooth Low Energy (BLE), ANT, and Nordic’s proprietary 2.4GHz ultra low-power wireless communication – it even features on-chip NFC tag support.
SparkFun’s nRF52832 Breakout provides easy access to all of the chip’s features. It breaks out all of the nRF52’s I/O pins, provides a 32.768kHz RTC crystal, a user-programmable button and LED, and a trace antenna to send and receive those 2.4GHz transmissions. Plus, to make the chip as easy-to-flash as possible, the breakout comes pre-programmed with a serial bootloader.
Nordic’s nRF52832 is an SoC that combines an ARM Cortex-M4F microprocessor with a 2.4GHz multiprotocol radio. In addition to providing access to all of the chip’s I/O pins, the breakout board includes a handful of external components. The nRF52832 can operate on a power supply between 1.7 and 3.6V. The board also includes a 3.3V regulator with a maximum input of 6V, if you want to power the board with batteries or a regulated wall supply.
Get Started with the nRF52832 Breakout Guide
Features:
- Bluetooth Low Energy (BLE), ANT and proprietary 2.4GHz radio support
- 32-bit ARM Cortex-M4F Processor
- Easy access to all 32 GPIO
- SPI, I2C, UART, PWM and ADC I/O support
- User-programmable LED and button
- 32.768kHz RTC Crystal
- Pre-programmed serial bootloader
- Arduino board definition available!
Documents:
Videos
該nRF52832是芯片（SoC），Nordic半導體公司最新的多協議無線電系統。這是半單片機，具有的功能，包括32配置的I / O引腳，SPI，I 2 C，UART，PWM，ADC的，512KB閃存，64KB和RAM的列表。而且它的一半多協議的2.4GHz無線，藍牙支持低功耗（BLE），Ant和北歐獨有的2.4GHz的超低功耗無線通信 - 它甚至帶有片上NFC標籤的支持。
SparkFun的nRF52832突圍提供了輕鬆訪問所有的芯片的功能。它打破了所有的nRF52的I / O引腳，提供了一個32.768kHz的RTC晶體，用戶可編程按鈕和LED指示燈和一個跟踪天線來發送和接收這些2.4GHz的傳輸。另外，為了使芯片容易閃越好，突破是預編程的串行引導程序。
北歐的nRF52832是一個2.4GHz的多協議無線結合了ARM Cortex-M4F微處理器SoC中。除了對所有芯片的I / O引腳提供接入，突破板包括外部元件的屈指可數。該nRF52832可在1.7至3.6V的電源供電。該板還包括與6V的最大輸入一個3.3V穩壓器，如果你想用電池或穩壓電源牆面板供電。
特徵：
- 藍牙低功耗（BLE），ANT和專有2.4GHz的收音機支持
- 32位ARM Cortex-M4F處理器
- 輕鬆訪問所有32個GPIO
- SPI，I 2 C，UART，PWM和ADC的I / O支持
- 用戶可編程LED指示燈和按鈕
- 32.768kHz的RTC水晶
- 預編程的引導程序串口
- Arduino板的定義可用！
文件：
