進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
利利帕德FTDI基本突圍 - 5V
原名
LilyPad FTDI Basic Breakout - 5V
貨號
DEV-10275
特價
493
資料來源：https://www.sparkfun.com/products/10275
This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship as 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Note: We know a lot of you prefer microUSB over miniUSB. Never fear, we’ve got you covered! Check out our FT231X Breakout for your micro FTDI needs!
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.
Documents:
這是我們的利利帕德修訂FTDI基礎 。它是同我們其它FTDI基本的，但有一個紫色利利帕德板是厚度的一半。
這是FTDI FT232RL USB轉串口IC基本接口板。這款主板的引腳相匹配的FTDI電纜官方的Arduino和克隆5V的Arduino電路板工作。它也可以用於一般的串行應用。本主板的主要區別在於，它帶出了DTR引腳相對於FTDI電纜的RTS引腳。 DTR引腳允許在一個新的草圖下載一個Arduino目標自動復位。這是一個非常不錯的功能，並允許一個草圖，而無需打復位按鈕進行下載。該網卡將自動重置帶來了一個6針連接器復位引腳的Arduino板。
標記BLK和GRN引腳對應的FTDI電纜的彩色電線。在FTDI線的黑線是接地，綠色的是CTS。使用這些BLK和GRN引腳對齊FTDI基本板與Arduino的目標。
該電路板有TX和RX的LED，使其成為一個好一點超過了FTDI電纜使用。實際上，你可以看到的LED串行流量以驗證板工作。
該電路板的設計，以減少Arduino的開發成本，提高易用性（自動復位功能，岩石！）。我們專業的Arduino板和LilyPads使用這種類型的連接器。
其中的這款主板的不錯的功能是在電路板上，使板被配置為3.3V或5V（包括功率輸出和IO級別）背面的跳線。這船上為5V，但你可以切默認跟踪，如果你需要切換到3.3V添加焊料跳線。
注：我們知道很多你喜歡的microUSB了miniUSB接口。別擔心，我們已經得到了你覆蓋！看看我們的FT231X突圍你的微FTDI的需求！
注：本次出售的一部分返還給利亞Buechley博士持續發展和電子紡織品的教育。
文件：
