官方授權台灣代理分銷
2.2 寸彎曲感應器-A201
原名
2.2 Inch Bend Sensor - A201
貨號
114990106
分類
Sensor for Interaction
特價
889
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/2.2-Inch-Bend-Sensor---A201-p-2090.html
Description
Introduction:
This force sensor is an ultra-thin, flexible printed circuit. The standard A201 force sensor is constructed of two layers of substrate (polyester) film. The high-temp model (HT201) is constructed of two layers of polyimide.
On each layer, a conductive material (silver) is applied, followed by a layer of pressure-sensitive ink.
Adhesive is then used to laminate the two layers of substrate together to form the force sensor.
The active sensing area is defined by the silver circle on top of the pressure-sensitive ink. Silver extends from the sensing area to the connectors at the other end of the sensor, forming the conductive leads.
A201 sensors are terminated with male square pins, allowing them to be easily incorporated into a circuit. The two outer pins of the connector are active and the center pin is inactive.
Features:
- better linearity
- measurement of higher loads
- stable output with respect to load area
Specification:
- Physical Properties:
- Thickness: 0.008 in. (.203 mm)
- Length: 7.75 in. (197 mm)
- 6 in. (152 mm)
- 4 in. (102 mm)
- 2 in. (51mm)
- Width: 0.55 in. (14 mm)
- Sensing Area: 0.375 in. diameter (9.53 mm)
- Connector: 3-pin male square pin
Typical Performance:
- Linearity Error:
- Repeatability:
- Hysteresis: <4.5% of full scale
- Drift:<5% per logarithmic time scale
- Response Time: <5 microseconds
- Operating Temperatures: -40°F - 140°F(-40°C - 60°C)
- Force Ranges: 0-1 lb (4.4 N), 0-25 lb (110 N),0-100 lb (440 N)
- Temperature Sensitivity: Output variance up to 0.2% per degree F
For any technical support or suggestion, please kindly go to ourforum.
描述
介紹:
這種力感應器是一種超薄、柔性的印製電路。標準的 A201 力感應器是由兩層基體 (聚酯) 薄膜構成的。高溫度模型 (HT201) 由兩層聚醯亞胺組成。
在每一層上, 採用導電材料 (銀), 其次是一層壓敏油墨。
然後用粘合劑將兩層基體複合形成力感應器。
活動傳感區由壓敏油墨上的銀圈定義。銀從傳感區延伸到感應器另一端的連接器, 形成導電導線。
A201 感應器被終止與男性方形引腳, 允許他們容易地被合併入電路。連接器的兩個外部針腳處於活動狀態, 中心針腳處於非活動狀態。
功能:
- 更好的線性
- 高載荷的測量
- 相對於負載區域的穩定輸出
規範:
- 物理屬性:
- 厚度: 0.008. (. 203 毫米)
- 長度: 7.75 在. (197 毫米)
- 6在. (152 毫米)
- 4在. (102 毫米)
- 2在. (51mm)
- 寬度: 0.55 在. (14 毫米)
- 傳感面積: 0.375 內徑 (9.53 mm)
- 連接器: 3 針男性方形銷
典型性能:
- 線性誤差:
- 重複:
- 遲滯: < 4.5% 的全音階
- 漂移: < 5% 每對數時間刻度
- 回應時間: < 5 微秒
- 工作溫度:-40°F-140 (-40 ° c)
- 力範圍: 0-1 磅 (4.4 n), 0-25 磅 (110 n), 0-100 磅 (440 n)
- 溫度靈敏度: 輸出方差可達每華氏度0.2%
對於任何技術支援或建議, 請轉到我們的論壇。
