官方授權台灣代理分銷
GPRS 遮罩 V3。0
資料來源：https://www.seeedstudio.com/GPRS-Shield-V3.0-p-2333.html
Description
This is version 3.0 of GPRS Shield.
Hook your Arduino up to GSM/GPRS cell phone network with GPRS shield! You can use your Arduino/Seeeduino or other main boards to dial a phone number or send a text to your friend via easy to use AT commands now.
GPRS Shield features a quad-band low power consumption GSM/GPRS module SIM900 as well as a compact PCB antenna.Meanwhile, improvements on interfaces and basic circuit have been taken to make it more concise and reliable.
And there’re two choices for you to communicate GPRS shield with the main board -- UART or SoftwareSerial.
The difference between this version and the previous version is, changing the arduino socket to the latest Arduino Uno standard. Except this, all the features are same with the previous version.
Compatible with standard Arduino and Arduino Mega
Selectable interface between hardware serial port and software serial port
Quad band support: 850/900/1800/1900MHz
Support TCP/UDP protocols
Full control via AT commands set: Standard - GSM 07.07 & 07.05 and Enhanced - SIMCOM AT Commands
2-in-1 headset jack
Convenient external SIM card holder
Low power consumption: 1.5mA(sleep mode)
Specification
Compatible:Arduino UNO/Seeeduino directly ; Other main board via jumpers;
Selectable interface:UART, Software seria;
Quad band support:850/900/1800/1900MHz;
Communication support:Standard - GSM 07.07 & 07.05 and Enhanced - SIMCOM AT Commands;
Operation temperature:-40°C to +85 °C;
Protocol support:0710 MUX protocol, embedded TCP/UDP protocol, FTP/HTTP, FOTA, MMS, embedded AT;
Certification of SIM900:CE, IC, FCC, ROHS, PTCRB, GCF, ICASA, REACH, AT&T
Dimensions: 68.58 * 53.34mm;
Power supply:5v via 5V pin, 6.5~12v via Vin pin;
Technical Details
| Dimensions | 100mm x 65mm x 30mm |
| Weight | G.W 47g |
| Battery | Exclude |
| Compatible | Arduino UNO/Seeeduino directly ; Other main board via jumpers |
| Selectable interface | UART, Software seria |
| Quad band support | 850/900/1800/1900MHz |
| Communication support | Standard - GSM 07.07 & 07.05 and Enhanced - SIMCOM AT Commands |
| Operation temperature | -40°C to +85 °C |
| Protocol support | 0710 MUX protocol, embedded TCP/UDP protocol, FTP/HTTP, FOTA, MMS, embedded AT |
| Certification of SIM900 | CE, IC, FCC, ROHS, PTCRB, GCF, ICASA, REACH, AT&T |
| Dimensions | 68.58 * 53.34mm |
| Power supply | 5v via 5V pin, 6.5~12v via Vin pin |
Part List
| GPRS Shield V3.0 | 1 |
描述
這是3.0 版的 GPRS 遮罩。
掛鉤您的 Arduino 到 GSM/gprs 蜂窩電話網絡與 gprs 遮罩!您可以使用您的 Arduino/Seeeduino 或其他主機板撥打電話號碼或發送文本給您的朋友, 通過便於使用的命令現在。
gprs 遮罩具有四波段低功耗 GSM/gprs 模組 SIM900 以及緊湊的 PCB 天線。同時, 對介面和基本電路進行了改進, 使其更加簡潔可靠。
還有兩個選擇, 您可以與主機板 (UART 或 SoftwareSerial) 交流 GPRS 遮罩。
此版本與以前版本的區別在於, 將 arduino 插槽更改為最新的 arduino 標準。除了這一點, 所有的功能都與以前的版本相同。
相容標準 Arduino 和 Arduino 兆
硬體串口和軟體串口之間的可選介面
四波段支援: 850/900/1800/1900 mhz
支援 TCP/UDP 協定
通過 at 命令集完全控制: 標準-GSM 07.07 & 07.05 和增強 SIMCOM at 命令
2進1耳機插孔
方便的外置 SIM 卡夾
低功耗: 1.5mA (睡眠模式)
規範
相容: Arduino Seeeduino 直接;其他主機板通過跳線;
可選介面: UART、軟體 seria;
四波段 support:850/900/1800/1900MHz;
通信支援: 標準-GSM 07.07 & 07.05 和增強 SIMCOM AT 命令;
操作 temperature:-40°C 到 +85 ° c;
協定 support:0710 MUX 協定, 嵌入式 TCP/UDP 協定, FTP/HTTP, FOTA 解決方案, MMS, 嵌入在;
認證 SIM900:CE, 積體電路, FCC, ROHS, PTCRB, 全球合作框架, ICASA, 到達, 在 & T
尺寸: 68.58 * 53.34mm;
電源 supply:5v 通過5V 引腳, 6.5 〜 12 v 通過 Vin 針;
技術細節
| 尺寸 | 100mm x 65mm x 30mm |
| 重量 | G. W 47g |
| 電池 | 排除 |
| 相容 | 直接 Arduino Seeeduino;其他主機板通過跳線 |
| 可選介面 | UART, 軟體 seria |
| 四波段支援 | 850/900/1800/1900 mhz |
| 通信支援 | 標準-GSM 07.07 & 07.05 和增強 SIMCOM AT 命令 |
| 操作溫度 | -40 至 +85 ° c |
| 協定支援 | 0710 MUX 協定, 嵌入式 TCP/UDP 協定, FTP/HTTP, FOTA 解決方案, MMS, 嵌入在 |
| SIM900 認證 | CE, 積體電路, FCC, ROHS, PTCRB, 全球合作框架, ICASA, 達到, & T |
| 尺寸 | 68.58 * 53.34mm |
| 電源 | 5v 通過5V 引腳, 6.5 ~ 12 v 通過 Vin 別針 |
部件清單
| GPRS 遮罩 V3。0 | 1 |
