官方授權台灣代理分銷
Grove - 運營商的XBee
資料來源：https://www.seeedstudio.com/Grove---XBee-Carrier-p-905.html
Description
XBee Carrier is a Wireless Sensor Network (WSN) base board designed for Bee series and groves. It is primarily suitable for standalone Bee Nodes like RFBee,Wifi Bee which have ATMega328 onboard. It is compatible with RFBee, Wifi Bee , XBee and Bluetooth Bee. Besides a Bee receptacle, there are also two Grove connectors. The board cab be powered by a lithium battery or through USB cable. You can use a Wireless charger, Solar Panel or the USB cable to charge the battery. The FT232RL chip onboard helps in downloading the program to Bee Module directly.
Bees which do not have ATMega328 like Bluetooth Bee can only be configured by using on-board FT232RL(USB to UART). Theses Bees are not suitable for standalone applications.
The on-board FT232RL can be used like any other 3.3V USB to UART interface when not connected to any Bee Modules. This is useful for programming a 3.3V MCU through Serial Port.
Features
Bees compatible receptacle
Two grove connector - one for I2C and other for D6,D5
Two grove place holders
On-Board Charge Controller CN3063
On-Board 3.3V LDO Lownoise Micropower Regulator - RT9167A_33PB
On-board FT232RL UBS-UART IC
LEDs for PWR, charge indication and UART transmission.
Power switch
Reset button
2.0mm pitch JST connector for Battery and Charger.
Application Ideas
Wireless Sensor Network with Standalone Bee Node like Wifi Bee.
As a configuration aid for Bees using FT232RL.
Charger for Lithium Ion Cells using on-board charge controller.
As a FT232RL based 3.3v USB-UART.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Technical Details
| Dimensions | 130mm x 90mm x 10.5mm |
| Weight | G.W 20g |
| Battery | Exclude |
Part List
| Grove - XBee Carrier | 1 |
的XBee運營商是無線傳感器網絡（WSN）基板設計的蜜蜂系列和樹林。它主要適用於獨立的小蜜蜂一樣的節點RFBee ， 無線蜂具有ATMega328船上。它與RFBee，無線蜂的XBee和兼容藍牙蜜蜂 。除了一個蜂容器，也有兩種樹叢連接器。董事會駕駛室由一個供電鋰電池或通過USB電纜。您可以使用無線充電器， 太陽能電池板或USB數據線為電池充電。該芯片FT232RL板載有助於直接下載程序蜜蜂模塊。
它沒有像藍牙蜜蜂蜜蜂ATMega328只能使用板載FT232RL（USB轉UART）進行配置。論文蜜蜂不適於獨立應用程序。
板載FT232RL可以用於像任何其他3.3V USB轉UART接口時，未連接到任何蜂模塊。這是通過串口編程3.3V MCU是有用的。
特徵
- 蜜蜂插座兼容
- 兩個小樹林連接器 - 一個用於為D6，D5 I2C等
- 兩個小樹林佔位
- 板載充電控制器CN3063
- 板載3.3V LDO低噪聲微功率穩壓器- RT9167A_33PB
- 板載FT232RL UBS-UART IC
- LED用於PWR，充電指示和UART傳輸。
- 開關;電源開關
- 復位按鈕
- 2.0mm間距JST連接器，電池和充電器。
應用理念
- 無線傳感器網絡與單機蜂節點像蜜蜂無線。
- 作為輔助配置使用FT232RL蜜蜂。
- 充電器使用板載充電控制器，鋰離子電池。
- 作為一個基於FT232RL 3.3V USB-UART。
