官方授權台灣代理分銷
拱門GPRS V2
資料來源：https://www.seeedstudio.com/Arch-GPRS-V2-p-2026.html
Description
Arch GPRS V2 is the new and improved version of the Arch GPRS development board from Seeed Studio. Like the original Arch GPRS, it is also an mbed enabled development board that houses a cellular networking module along with a microcontroller. Arch GPRS V2 uses the LPC11U37 Microcontroller instead of the LPC11U24 used on the Arch GPRS. You can use the mbed C/C++ SDK, libraries and optimizing online development tools to rapidly build your Arch GPRS V2 based prototype. The cellular networking module on the Arch GPRS is based on the SIM900 Quad-band GSM/GRPS engine from SIMCom. With this, data collection functions can be performed easily using the 2G GSM/GPRS based cellular network.
Arch GPRS V2 has a standard Arduino interface as well as Grove connectors on board. It’s convenient to connect existing Shields and Grove products to Arch GPRS V2. You can even connect a solar panel directly to the board to allow for the battery to charge from it. A low-power design guarantees easy charging and long hour operations when outdoors!
Note
Arch GPRS V2 doesn't come with an mbed interface. To output debug messages, please try USBSerial.
Features
mbed enabled
Online development tools
Easy to use C/C++ SDK
Lots of published libraries, projects
NXP LPC11U37 Controller
Low power ARM Cortex-M0 Core
On chip 128KB Flash, 12KB SRAM, 4KB EEPROM
USB Device, UART, I2C
SIM900 Module
Quad-band (850/900/1800/1900MHz) GSM/GPRS support
Supports external SIM card： 1.8V/3V
Control with standard AT Commands
Select automatically USB5V or Solar panel to charge a battery
Technical Details
| Dimensions | 115mm x 75mm x 20mm |
| Weight | G.W 51g |
| Battery | Lithium Cells / Batteries contained in equipment UN3481 - PI967 |
Part List
| Arch GPRS V2 | 1 |
描述
拱門GPRS V2是拱門GPRS開發板從Seeed Studio中的新的和改進的版本。像原來的拱門GPRS，它也是一個mbed使開發板與微控制器一起擁有一個蜂窩網絡模塊。拱門GPRS V2採用LPC11U37微控制器，而不是對拱GPRS使用的LPC11U24。您可以使用mbed C / C ++ SDK，庫和優化在線開發工具來快速構建你的GPRS拱V2基於原型。在拱GPRS蜂窩網絡模塊是基於芯訊通SIM900的四頻GSM / GRPS引擎。由此，數據收集功能可以很容易地使用2G GSM /基於GPRS蜂窩網絡執行。
拱門GPRS V2有一個標準的Arduino接口以及主板上的連接器樹叢。它的方便，以現有的盾牌和格羅夫產品連接到GPRS拱V2。你甚至可以直接連接太陽能電池板到板，以便將電池從電池充電。低功耗設計保證方便充電和長小時的操作時，在戶外！
注意：
拱門GPRS V2並沒有拿出一個mbed接口。輸出調試消息，請嘗試USBSerial。
特徵
啟用mbed
在線開發工具
簡單易用的C / C ++ SDK
很多出版庫，項目
恩智浦LPC11U37控制器
低功耗的ARM Cortex-M0內核
片上閃存128KB，12KB SRAM，EEPROM 4KB
USB設備，UART，I2C
SIM900模塊
四頻（850/900/1800 / 1900MHz的）GSM / GPRS支持
支持外部SIM卡：1.8V / 3V
控制與標準的AT命令
選擇自動或USB5V太陽能電池板為電池充電
