資料來源:https://www.seeedstudio.com/RF-Explorer-6G-model-p-2198.html
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated frequency synthesizer and double balanced mixer which offers high performance, compact size, low consumption and low cost.
It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector.
This model includes a 6G baseline standard unit. It comes with one SMA connectors and a rubber duck 5.8 GHz antenna, good for 5.2-6.0GHz scanning. Additional, specific band antennas may be needed to cover efficiently some of the frequencies supported.
Can be extended with internal Expansion Modules for additional band and functionality, and easily convert it to a 6G Combo or WiFi Combo more capable models.
The combination of these two models offer coverage for most used communication frequency range used in modern communication technologies including 5GHz WiFi, Wireless Video, 5.8GHz ISM, Satellite, etc.
Features
Pocket size and light weight
Solid aluminum metal case
Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes
Lifetime free firmware upgrades available, open to community requested features
High capacity Lipo for 16hs+ of continuous run, rechargeable by USB
Windows PC client Open Source
Wide band coverage to all popular RF frequencies in the 6GHz range, starting at 4850MHz and up to 6100MHz.
Firmware: RF Explorer 6G is delivered with upgraded firmware v1.12. Note some of the features and operation accuracy will be improved in upcoming lifetime free firmware revisions.
Note this unit does not include RF Generator functionality, only Spectrum Analyzer functionality is available. For signal generator and tracking please consider RF Explorer Signal Generator model RFE6GEN.
Specification
Frequency band: 4850-6100MHz
Frequency span: 112KHz - 300MHz (can extend to 600MHz with any expansion module connected)
Graphics LCD 128x64 pixels, great visibility outdoors
PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits
Backlight for great indoor visibility
One standard SMA 50 ohms Spectrum Analyzer connector : 4850-6100MHz
Amplitude resolution: 0.5dBm
Dynamic range -105dBm to -15dBm
Absolute Max input power +25dBm
Average noise level (typical): -105dBm
Frequency stability and accuracy (typical) +-0.5ppm
Amplitude stability and accuracy (typical): +-3dBm
Frequency resolution: 1Khz
Resolution bandwidth (RBW): automatic 58Khz to 812Khz
Size: 113x70x25 mm
Techsupport
This product is designed by RF-Explorer,
For more info and to get started with your RF Explorer, visit the start page.
For questions and support, please visit https://support.rf-explorer.com
For the software for RF Explorer series, please click the following logo for more information:
If you'd like to buy or change the RF Explorer Battery, please click here.
Weight | G.W 262g |
Battery | Lithium Cells / Batteries contained in equipment UN3481 - PI967 |
RF Explorer 6G model | 1 |
RF Explorer是一個手持數字頻譜分析儀,工作在所有流行的頻段非常實惠的工具。它是基於高度集成的頻率合成器和雙平衡混頻器,它具有高的性能,緊湊尺寸,低功耗和低成本。
它被設計為可使用同樣良好的室外和室內,並可以使用標準的迷你USB 2.0連接器連接到PC進行額外的功能。
該模型包括一個6G的基線標準單位。它帶有一個SMA連接器和橡膠鴨子5.8GHz的天線,好為5.2-6.0GHz掃描。可能還需要額外的具體波段天線,以有效地覆蓋一些支持的頻率。
可以用內部擴展模塊額外的頻段和功能進行擴展,並輕鬆地將其轉換為6G組合或WiFi組合更強大的車型。
這兩種模式的結合,提供覆蓋現代通信技術,包括5GHz的無線網絡,無線視頻,5.8GHz的ISM,衛星等使用最常用的通信頻率範圍
特徵
注意:這個單位並不包括RF發生器功能,只有頻譜分析儀的功能是可用的。對於信號發生器和跟踪請考慮射頻資源管理器信號發生器型號RFE6GEN。
規範
如果您在使用本產品時遇到任何問題,請聯繫rfexplorer(AT)arocholl.com的技術支持。
至於軟件射頻資源管理器系列,請點擊下面的標誌以了解更多信息: