資料來源:https://www.seeedstudio.com/W5500-Ethernet-Shield-p-2433.html
The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The shield also have two Grove connectors and a microSD card socket to support projects which require storing large amounts of data from Grove sensor. The RJ45 port (Where the Ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
Features
Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Supports 8 independent sockets simultaneously
Supports Power down mode
Supports Wake on LAN over UDP
Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
Internal 32Kbytes Memory for TX/RX Buffers
10BaseT/100BaseTX Ethernet PHY embedded
Supports Auto Negotiation (Full and half duplex, 10 and 100* based )
Not supports IP Fragmentation
3.3V operation with 5V I/O signal tolerance
LED outputs (Full/Half duplex, Link, Speed, Active)
Micro-SD card socket
Grove connector for I2C and UART
Dimensions | 100mm x 65mm x 30mm |
Weight | G.W 44g |
Battery | Exclude |
W5500 Ethernet Shield | 1 |
W5500 乙太網屏蔽 v1.0 可用於為您的專案提供 internet 連接。W5500 使使用者只需使用 tcp/ip 堆疊、10/100 乙太網 MAC 和物理嵌入的單晶片即可在其應用程式中實現 Internet 連接。該盾牌還有兩個格羅夫連接器和一個 microSD 卡插座, 以支援專案需要存儲大量的資料從格羅夫感應器。RJ45 埠 (乙太網電纜連線到的地方) 足夠低, 可以讓您在需要時堆疊更多的防護罩。
功能
支援硬連線 tcp/ip 協定: tcp、UDP、ICMP、IPv4、ARP、IGMP、PPPoE
同時支援8獨立插座
支援斷電模式
支援 UDP 上的局域網喚醒
支援高速串列外設介面 (SPI 模式 0, 3)
用於 TX/RX 緩衝區的內部32Kbytes 記憶體
10 10/100baset/100 basetx 乙太網物理嵌入
支援自動協商 (完整和半雙工, 10 和 100 * 為基礎)
不支援 IP 碎片
3.3V 5V i/o 信號容錯操作
LED 輸出 (全/半雙工, 鏈路, 速度, 活動)
微型 SD 卡插座
I2C 和 UART 的格羅夫連接器