資料來源:https://www.seeedstudio.com/Bus-Pirate-v3.6-universal-serial-interface-p-609.html
Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. A laser cut acrylic case for Bus Pirate v3.6 is also available.
This board provides 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols.
Features
USB interface, USB powered
5-volt tolerant pins-0-6volt measurement probe
1Hz-40MHz frequency measurement
1kHz-4MHz pulse-width modulator, frequency generator
On-board multi-voltage pull-up resistors
On-board 3.3volt and 5volt power supply with software reset
Macros for common operations
Bus traffic sniffers (SPI, I2C)
Transparent USB to serial bridge mode
10Hz-1MHz low-speed logic analyzer
AVR STK500 v2 programmer clone
Scriptable from Perl, Python, etc.
A bootloader for easy USB firmware updates
Open source (CC 0/Public Domain)
Weight | G.W 12g |
Battery | Exclude |
Bus Pirate v3.6 universal serial interface | 1 |
總線海盜V3是一個通用的總線接口從PC機串口終端會談到電子產品。了解無需編寫代碼的芯片。消除了與噸新的或未知的芯片早期原型的努力。一客車海盜V3.6激光切割亞克力情況下也可以使用。
此板提供的1-Wire,I2C,SPI,JTAG,異步串口(UART),MIDI,電腦鍵盤,液晶顯示器HD44780和通用2線和3線庫自定義協議。
特徵
支持
如果您在使用本產品時遇到任何問題,這裡是論壇 ,從中可以得到技術支持。
相關產品
公交車V4海盜 | 公交衝擊波V3 | 公交衝擊波V4 | 總線海盜V3探頭套件 |