英特爾®愛迪生突圍套件

This Kit includes a tiny Edison fits nicely onto a breakout board - sort of like a tiny IoT sparrow into a very small nest, so you can expose the native 1.8 V I/O of the Edison.

And it is for non-Arduino users. This breakout board has a minimalistic set of features and is slightly larger than the Edison module.

Dimensions: 61mm x 29mm x 12mm

Features

• Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz.  It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.

• The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.

• It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.

• The breakout board has exposes native 1.8V I/O of edison module. And 0.1'' grid I/O array of through-hole solder points. USB OTG with USB Micro Type-AB connector, USB OTG power switch. Battery Charge, USB to device UART bridge with USB Micro Type-B connector,  DC power supply jack (7V – 15V DC input).

Specification

Physica
Form factor	Board with 70-pin connector
Dimensions	61mm x 29mm x 12mm
Operating temperature	0 to 40 degC
Connector	Hirose DF40 Series (1.5mm, 2.0mm, or  3.0mm stack height)
Memory
Max Memory size	4GB
Memory type	DDR3, Nand Flash
Physical add. Ext.	32-bit
# of  DIMMs	0
ECC Memory supported:	NO
External Interfaces
Total of 40 GPIOs which can be configured as:
SD Card	1 Interface
UART	2 Controllers
I2C	2 Controllers
SPI	1 Controller with 2 chip selects
I2S	1 Controller
GPIO	Additional 12 (with 4 capable of PWM)
USB 2.0	1 OTG Controller
Clock Output	32 KHz, 19.2 MHz
Major Edison Components
SoC	22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz
RAM	1 GB LPDDR3 POP memory
Flash Storage	4 GB eMMC
WiFi	Broadcom 43340 802.11 a/b/g/n
	Dual-band (2.4 and 5 GHz)
	On board antenna or external antenna SKU configurations
Bluetooth	BT 4.0
Power
Input	3.3V – 4.5V
Output	100ma @3.3V and 100ma @ 1.8V
Power	Standby (No radios): 13mW
	Standby (BT 4.0): 21.5mW
	Standby (WiFi): 35 mW
Firmware + Software
CPU OS	Yocto Linux v1.6
Development Environments	Arduino IDE
	Eclipse supporting: C, C++ & Python
	Intel XDK supporting: Node.JS & HTML5
MCU OS	RTOS
Development Environments	MCU SDK and IDE

Documents

• Intel Edison Product Page    

• Intel Edison Product Brief    

• Getting Start    

• Software Download    

• Forum    

• Support    

Related Products

• Intel® Edison Module    

• Intel® Edison Kit for Arduion    

• Intel®  Gelileo    

• Intel®  Gelieo Gen 2    

• USB Console Adapter for Intel GalileoGrove starter kit plus – Intel IoT Edition for Intel Galileo Gen    

• Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen 1    

• Galileo Case