資料來源:https://www.seeedstudio.com/Grove---Loudness-Sensor-p-1382.html
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphone, it amplifies and filters the high frequency signal that received from the microphone, and outputs a positive envelop. This will make for Arduino's signal acquisition. The output value depends on the level of sound input. In order to avoid unnecessary signal disturbances, input signal will go through two times filtering inside the module. Lastly, there is a screw potentiometer that enables manual adjustments to the output gain.
Features
Grove compatible interface
Wide supply voltage range
Built-in signal filtering
Gain adjustable via screw potentiometer
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Dimensions | 24mm x 20mm x 9.8mm |
Weight | G.W 9g |
Battery | Exclude |
Voltage | 3.5~10 VDC |
Working Frequency | 50~2000 Hz |
Sensitivity | -48~66 dB |
Signal-to-noise Ratio | >58 dB |
Output Signal range | Analog Signal (0-1023) |
Grove - Loudness Sensor | 1 |
The Grove - Loudness Sensor is designed to detect the sound of environment. Based on LM2904 amplifier and a built-in microphone, it amplifies and filters the high frequency signal that received from the microphone, and outputs a positive envelop.
The maker says: Just the first time I saw children’s painting, had idea to create it in kind. Every stitch was completed by hand according painting. Especially, added some special functions that girl’s skirt could give out blue light and ...
格羅夫響度感應器旨在檢測環境聲音的響度。基於放大器 LM2904 和內置麥克風, 它放大和過濾從麥克風接收到的高頻信號, 並輸出一個正的信封。這將使 Arduino 的信號採集。輸出值取決於聲音輸入的級別。為了避免不必要的信號干擾, 輸入信號將在模組內進行兩次過濾。最後, 有一個螺絲電位器, 使手動調整的輸出增益。
功能
格羅夫相容介面
寬電源電壓範圍
內置信號過濾
通過螺釘電位器增益可調
對於所有格羅夫使用者 (特別是初學者), 我們為您提供指導 PDF 文檔。請在使用該產品之前下載並閱讀序言-入門版和介紹到格羅夫 。
檔
請訪問我們wiki頁面以瞭解有關此產品的更多資訊。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。有關技術支援, 請將您的問題張貼到我們的論壇.
尺寸 | 24mm x 20mm x 9.8mm |
重量 | G. W 7g |
電池 | 排除 |
電壓 | 3.5 ~ 10 VDC |
工作頻率 | 50 ~ 2000 赫茲 |
敏感性 | -48 ~ 66 dB |
信噪比 | > 58 dB |
輸出信號範圍 | 類比信號 (0-1023) |
格羅夫-響度感應器 | 1 |