資料來源:https://www.seeedstudio.com/Grove---Infrared-Receiver-p-994.html
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38 KHz. The Infrared Receiver can receive signals well within 10 meters. If more than 10 meters , the receiver may not get the signals. We often use the two Twigs-the Infrared Receiver and the Infrared Emitter to work together.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Dimensions | 20mm x 20mm x 10mm |
Weight | G.W 9g |
Battery | Exclude |
Grove - Infrared Receiver | 1 |
紅外線接收器用於接收紅外信號, 也用於遠端控制檢測。紅外線接收器上有紅外探測器, 用於獲取紅外線輻射源發出的紅外光。ir 探測器有一個解調器裡面, 尋找調製的 ir 在38赫。紅外線接收器能在10米以內接收信號。如果超過10米, 接收器可能無法得到信號。我們經常使用兩個小樹枝-紅外線接收器和紅外線發射裝置一起工作。
對於所有格羅夫使用者 (特別是初學者), 我們為您提供指導 PDF 文檔。請在使用該產品之前下載並閱讀序言-入門版和介紹到格羅夫。
檔
請訪問我們wiki 頁有關此產品的詳細資訊。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。有關技術支援, 請將您的問題張貼到我們的論壇.