現貨供應最新開發模組
Raspberry Pi RPi 樹莓派 B+ 2 Model B 高透明壓克力保護殼
販售商品只具備保護殼，不含圖片中示意之 Raspberry Pi Model B+
參考商品圖片您就可以輕易地自行組裝壓克力殼，注意壓克力雙面都各有一層防止刮傷的薄膜，請先撕開再行組裝。
本商品拆開上蓋不安裝，即可完美搭配本公司所販售之 3.2 吋或 3.5 吋 TFT 觸控 LCD。
原廠連結：http://www.seeedstudio.com/depot/Raspberry-Pi-B-acrylic-Acrylic-Enclosure-p-2133.html
Introduction:
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!
Features:
- 3mm acrylic
- Light and easy to transport
- good heat dispersion
Specification:
- Case size: 95x65.5x34.5mm
Weight: 64 g
資料來源：https://www.seeedstudio.com/Raspberry-Pi-B%2B%262%263-Acrylic-Enclosure-p-2133.html
Description
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!
Features
3mm acrylic
Light and easy to transport
good heat dispersion
Compatible with Raspberry PiB+/2.
Specification
Case size: 95x65.5x34.5mm
Compatible with
Technical Details
| Weight | G.W 65g |
| Battery | Exclude |
