原廠連結:http://www.seeedstudio.com/depot/RFEM-WSUB3G-Module-p-1264.html
RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 15-2700 MHz (0.015-2.7GHz) continuous frequency band.
It gets attached internally to the RF Explorer main board and exhibits a second antenna connector to cover the new band.
Feature
Important: Note this unit does not include RF Generator functionality, only Spectrum Analyzer functionality is available.
Specification
For more info and to get started with your RF Explorer, visit the start page.
If you encounter any problems when using this product, please contact rfexplorer(at)arocholl.com for the technical support.
Designer: RF Explorer
Weight: 121 g
資料來源:https://www.seeedstudio.com/RFEM-WSUB3G-Module-p-1264.html
RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 15-2700 MHz (0.015-2.7GHz) continuous frequency band.
It gets attached internally to the RF Explorer main board and exhibits a second antenna connector to cover the new band.
Feature
Easy to plug in your RF Explorer unit, compatible with all models. Optionally, you may want to order a fully assembled RF Explorer 3G Combo including a WSUB1G base model and a RFEMWSUB3G expansion module.
Includes a transport EVA carry case for RF Explorer
Extend band coverage to any frequency starting at 15MHz and going up to 2.7GHz. This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and WiMax, Bluetooth, etc.
Extend internal FLASH and RAM memory for additional capabilities
Lifetime free firmware upgrades available, open to community requested features
Currently no firmware support for expansion models is available in WSUB1G PLUS model; this is in current development and is expected in 2018. Please do not assemble any expansion module in WSUB1G PLUS model. For more details please visit www.rf-explorer.com/expansion.
Important: Note this unit does not include RF Generator functionality, only Spectrum Analyzer functionality is available.
Specification
Frequency band coverage: 15-2700 MHz
Standard SMA 50 ohms connector
Amplitude resolution: 0.5dBm
Dynamic range: -110dBm to -10dBm
Absolute Max input power: +30dBm
Average noise floor level (typical): -100dBm
50 ohms wideband Nagoya NA-773 telescopic antenna included
Frequency stability and accuracy (typical): +-10ppm
Amplitude stability and accuracy (typical): +-6dBm
Frequency Span: 100MHz
Frequency resolution: 1Khz
Resolution bandwidth (RBW): automatic 3KHz to 600KHz
Expansion RAM: 64KB
Expansion ROM: 2MB
Firmware: RF Explorer must upgrade to firmware v1.09 or higher to use this module. Note some of the features and operation accuracy will be improved in upcoming lifetime free firmware revisions.
Techsupport
This product is designed by RF-Explorer,
For more info and to get started with your RF Explorer, visit the start page.
For questions and support, please visit https://support.rf-explorer.com
For the software for RF Explorer series, please click the following logo for more information:
Weight | G.W 124g |
Battery | Exclude |
RFEM WSUB3G Module | 1 |
SMA 50 ohms connector | 1 |
Antenna | 1 |