現貨供應最新開發模組

24-6000MHz 無線訊號產生器 RF Explorer Signal Generator

  • Pocket size and light weight
  • Solid aluminum metal case
  • Lifetime free firmware upgrades available, open to community requested features
  • High capacity Lipo for 16hs+ of continuous run, rechargeable by USB
  • RF Explorer for Windows PC client Open Source
  • Can be extended with internal Expansion Modules for additional future band support and functionality
  • Wide band support

代號
rfe6gen

SKU 即原廠標號
114990081

定價
6,400
特價
6,000 (含營業稅)

庫存緊張

原廠連結:http://j3.rf-explorer.com/40-rfe/article/124-rf-explorer-signal-generator

RF Explorer Signal Generator

RF Explorer Signal Generator (RFE6GEN) is a 6GHz fully programmable, high accuracy handheld RF generator with CW, Sweep and Tracking functionality at a very affordable price tag.

RF Explorer Signal Generator user manual available here: www.rf-explorer.com/RFGEN_manual

Note: firmware included in factory may be outdated. To make sure you get latest features enabled, please download latest firmware and RF Explorer for Windows software from our download page.

Step by step tutorials for Network Analyzer mode

By combining RF Explorer Signal Generator with any of the RF Explorer Spectrum Analyzer models to the same computer, the system works as an advanced Scalar Network Analyzer:

Connecting RF Explorer units

For tracking SNA and other functionality that requires both Spectrum Analyzer and Signal Generator connected, it is recommended to connect the devices one by one to avoid any confusion. Please check previously listed tutorials for easy step by step procedure.

Using simple CW functionality

The simplest functionality to test is by using CW (carrier wave single frequency signal).

  1. Program any frequency between 24 and 6000 MHZ in the CW area.
  2. Select nominal power from the available option list.
  3. Make sure the Signal Generator has some 50ohm load before delivering RF power. Any load is valid (antenna, RF device, dummy load, etc) Failing to connect a RF load may damage the Signal Generator output stage.
  4. Click on [Start] button to deliver programmed RF power. The legend will change from black "RF Power OFF" into red "RF Power ON" to alert on the new status. Similarly, the Signal Generator device will alert with a RF POWER ON text at the bottom of screen.
  5. If you have the Spectrum Analyzer connected with a cable or device to the Signal Generator, you can go to the "Spectrum Analyzer" tab and see response there and operate with the Analyzer as usual.
  6. Click on [Stop] button anytime to stop delivering RF Power. Alternatively, you can click on [ENTER] button in the Signal Generator device to achieve the same result.


資料來源:https://www.seeedstudio.com/RF-Explorer-Signal-Generator-%28RFE6GEN%29-p-2074.html

Description

The RF Explorer Signal Generator (RFEGen) is a powerful, wideband fully programmable RF signal generator. It is the perfect companion for Spectrum Analyzer RF Explorer product line.


As a standalone unit, RFEGen can generate CW and Sweep signals by selecting embedded menu options. When connected to a PC, it can be fully programmed with the RF Explorer for Windows software tool. 


Further more, the unit can work as a powerful Tracking Generator when used with RF Explorer Spectrum Analyzer connected to the same PC, offering full Scalar Network Analyzer (SNA) capabilities. The SNA feature allows full characterization of filters, amplifiers and any 2-port RF device.


Features

  • Pocket size and light weight

  • Solid aluminum metal case

  • Lifetime free firmware upgrades available, open to community requested features

  • High capacity Lipo for 16hs+ of continuous run, rechargeable by USB

  • RF Explorer for Windows PC client Open Source

  • Can be extended with internal Expansion Modules for additional future band support and functionality

  • Wide band support

    • Frequency range supported: 24 to 6000 MHz

    • Frequency step/resolution: 1KHz

    Frequency stability: 0.5ppm

  • Temperature compensated (0-45C)

  • Backlight for great indoor visibility

  • Standard SMA 50 ohms connector

  • Programmable Amplitude with included internal programmable attenuator:

    • -40dBm to -30dBm in 3dB steps

    • -10dBm to 0dBm in 3dB steps

    Amplitude accuracy: +-0.5dB (normalized) or +-3dB (absolute)

  • Switch measurement point speed < 10ms

  • Graphics LCD 128x64 pixels, great visibility outdoors

  • PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits

  • Functional modes:

    • CW signal generator at any frequency in the range

    • Tracking generator functionality working together with RF Explorer when connected to the same PC

    Sweep generator between any to frequencies in the range, with selectable step size and speed

  • Expansion:

    • Expansion port for future enhancements (higher RF power modes, additional frequency bands)

    • Size: 113x70x25 mm


Note: 

Hardware is final and fully calibrated, but RF Explorer for Windows Software and embedded Firmware are delivered BETA and under development. Please go to this reference page as well as our facebook page to get progress update and download new versions as released.


Tech Support

This product is designed by RF-Explorer,

  • For more info and to get started with your RF Explorer, visit the start page.

  • For questions and support, please visit https://support.rf-explorer.com

  • For the software for RF Explorer series, please click the following logo for more information: 

 

If you'd like to buy or change the RF Explorer Battery, please click here.



Technical Details

Weight G.W 251g    
Battery Lithium Cells / Batteries contained in equipment UN3481 - PI967

Part List

RF Explorer Signal Generator 1

Line share