進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
bladeRF X40
原名
bladeRF x40
貨號
WRL-14041
特價
18,018
資料來源：https://www.sparkfun.com/products/14041
The bladeRF x40 is an affordable USB 3.0 Software-Defined Radio (SDR) designed to allow students and RF enthusiasts to explore wireless communication, and to provide professionals with a versatile COTS waveform development platform. The bladeRF x40 is a great next step after using an SDR like the HackRF One, especially with the built-in FPGA providing you with more user-defined options.
Out of the box, the bladeRF can tune from 300MHz to 3.8GHz without the need for extra boards. Through open source software such as GNURadio (live image), the bladeRF can be placed into immediate use. With its flexible hardware and software, the bladeRF can be configured to operate as a custom RF modem, a GSM and LTE picocell, a GPS receiver, an ATSC transmitter or a combination Bluetooth/WiFi client, without the need for any expansion cards.
Includes:
- 1x bladeRF x40 (40KLE Cyclone 4 FPGA)
- 1x USB 3.0 SS cable
- 2x SMA cables
Features:
- Full-duplex 40MSPS 12-bit quadrature sampling
- Factory calibrated VCTCXO tuned within 1Hz of 38.4MHz
- Removable-cap RF shields for increased system sensitivity and isolation
- Flexible clocking architecture for arbitrary sample rates
- GPIO expansion port (GPIO Expansion Board)
- SPI flash allowing for headless operation
- Expanded frequency coverage using XB-200 Transverter Board
- Typical +6dBm TX power
- Fully bus-powered USB 3.0 Superspeed SDR
- 300MHz–3.8GHz RF frequency range
- Independent RX/TX 12-bit 40MSPS quadrature sampling
- Capable of achieving full-duplex 28MHz channels
- 16-bit DAC factory-calibrated 38.4MHz +/-1ppm VCTCXO
- Onboard 200MHz ARM9 with 512KB embedded SRAM (JTAG port available)
- Onboard 40KLE Altera Cyclone 4 E FPGA (JTAG port available)
- 2x2 MIMO configurable with SMB cable, expandable up to 4x4
- Stable Linux, Windows, Mac and GNURadio software support
Documents:
Videos
該bladeRF X40是一個負擔得起的USB 3.0軟件定義無線電（SDR），旨在讓學生和RF愛好者探索無線通信，並提供了一個通用的COTS波形開發平台的專業人士。該bladeRF X40是使用類似於一個SDR後，一個偉大的下一步HackRF其中 ，尤其是內置的FPGA為您提供更多的自定義選項。
開箱即用，從300MHz至3.8GHz的bladeRF可調諧，而不需要額外的電路板。通過開源軟件，如gnuradio中（實時圖像）時，bladeRF可以放入立即使用。以其靈活的硬件和軟件，所述bladeRF可以配置為定制RF調製解調器，在GSM和LTE微微小區，一個GPS接收機，一個ATSC發射器或組合藍牙/無線客戶端來操作，而不需要任何擴充卡。
包括：
- 1X bladeRF X40（40KLE旋風4 FPGA）
- 1個USB 3.0電纜SS
- 2個SMA電纜
特徵：
- 全雙工40MSPS 12位正交採樣
- 工廠校準VCTCXO內38.4MHz的1Hz的調整
- 可拆卸帽RF屏蔽層以提高系統的靈敏度和隔離
- 靈活的時鐘架構任意採樣率
- GPIO擴展端口（GPIO擴展板）
- SPI閃存允許無頭操作
- 使用XB-200換能擴大董事會的頻率覆蓋
- 典型的+ 6dBm的發射功率
- 完全總線供電的USB 3.0超SDR
- 300MHz至3.8GHz的RF頻率範圍
- 獨立的RX / TX 12位40MSPS採樣正交
- 能夠實現全雙工28MHz的信道
- 16位DAC工廠校準38.4MHz +/- 1PPM VCTCXO
- 板載200MHz的ARM9與512KB嵌入式SRAM（JTAG端口可用）
- 板載40KLE Altera公司的Cyclone 4 E FPGA（JTAG端口可用）
- 的2×2MIMO配置與SMB電纜，最大可擴展至4×4
- 穩定的Linux，Windows，Mac和gnuradio中的軟件支持
文件：
