資料來源:https://www.sparkfun.com/products/10573
The Ubertooth One is an open source 2.4 GHz device suitable for Bluetooth experimentation. Based on the powerful LPC175x ARM Cortex-M3 microcontroller with full-speed USB 2.0, the Ubertooth One is a great way to develop custom Class 1 comparable Bluetooth devices. The entire board is onlytwo and a half inches long with a USB-A connector at one end and an RP-SMA connector at the other.
One thing that sets the Ubertooth apart from other Bluetooth development platforms and Software Defined Radios (SDR) is that it’s capable of not only sending and receiving 2.4 GHz signals, but can also operate in monitor mode, monitoring Bluetooth traffic in real-time. This operating mode has been present in low-cost WiFi modules for years and has found myriad uses in research, development and security auditing but no such solution existed for the Bluetooth standard until now. Also, because it’s a fully open-source platform (software and hardware), the schematics and code are readily available for all of your hacking needs.
Note: In order to open the schematic and board design files found in the source package, you will need to download KiCad, an open source electronic design automation software package.
Features:
Documents:
該Ubertooth一種是適用於藍牙試驗一個開放源碼的2.4 GHz無線開發平台。基於強大的LPC175x的ARM Cortex-M3微控制器,帶有全速USB 2.0的Ubertooth一是大力發展定制類1可比藍牙設備的好方法。整板是長著一端為USB-A接口,並在其他的RP-SMA連接器只有****兩個半英寸。
有一件事,從其他藍牙開發平台設置Ubertooth與眾不同的是,它不僅能發送和接收的2.4 GHz信號,而且還可以工作在監聽模式下,監視實時交通藍牙。這種操作模式目前已在低成本的WiFi模塊多年,發現在研究,開發和安全審計,但存在藍牙標準沒有這樣的解決方案,無數的用途至今。此外,因為它是一個完全開源的平台(軟件和硬件),原理圖和代碼都是現成的為您的所有需求的黑客。
特徵:
注意:為了打開源包中的原理圖和PCB設計文件,你需要下載KiCad的 ,一個開放源碼的電子設計自動化軟件。
尺寸:61.75毫米點¯x19毫米(2.43“×0.75”)
文件: