資料來源:https://www.sparkfun.com/products/13810
The Tsunami Super WAV Trigger is the next evolutionary step beyond the original WAV Trigger.
Based on a new generation ARM Cortex M7, the Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently, and can have its own volume setting, allowing you to create the perfect interactive mix of music, dialog and sound effects. The Tsunami also supports true seamless looping over an arbitrary track length.
The big news is that the Tsunami has 8 audio output channels, arranged as either 8 mono or 4 stereo pairs. Alternate versions of firmware support either mono and stereo architecture – you choose. The mono version adds a new “Synced Set” trigger function that can start up to 8 mono tracks on adjacent outputs. These tracks will start and stay in sample-sync for playing stereo or even 5.1 or 7.1 surround sound content with a single trigger. Any track can be dynamically routed to any output. And each output provides independent real-time volume and sample-rate conversion (pitch bend). For your convenience, the Tsunami also has full Arduino and Python libraries available which can be found in the Documents tab above!
Each Tsunami Super WAV Trigger has a dedicated MIDI port with an integrated opto-isolator, making it easy to connect to any MIDI controller. Tsunami’s MIDI implementation includes control of volume, pitch bend, attack and release times, and the ability to route any MIDI key to any of the output channels, as well as specifying single-shot or looping playback per key. It is very important to know that this is a 3.3V device, and its inputs – including triggers and serial RX – are not 5V tolerant!
Note: The Tsunami Super WAV Trigger will only work properly if your uSD card is formatted with the correct file allocation size (32Kb). If this is set incorrectly during formatting, then the Tsunami will show every erratic behavior and occasionally crash.
Note: The Tsunami was developed in collaboration with Robertsonics. A portion of each sale goes back to them for product support and continued development.
Get Started with the Tsunami Guide
Features:
Documents:
Videos
海嘯超級WAV觸發器是超出了原有的下一個循序漸進的步驟WAV觸發 。
基於新一代的ARM Cortex M7,海嘯延伸到複音32單聲道或立體聲18同時未壓縮的44.1kHz的16位軌道。每個軌道可以開始,暫停,恢復,循環和獨立的停止,可以有它自己的音量設置,可以讓你創建音樂,對話和音效的完美互動組合。海嘯還支持真正的無縫循環執行任意的軌道長度。
最大的消息是,海嘯8個音頻輸出通道,安排無論是8單聲道或立體聲4對。固件支持單聲道和立體聲的建築替代版本 - 您選擇。單聲道版本增加了一個新的“已同步設定”觸發功能,可以啟動對相鄰的輸出8單聲道音軌。這些軌道將啟動並保持樣品同步播放立體聲甚至5.1或7.1環繞聲內容用一個觸發器。任何軌道可以動態路由到任何輸出。而每路輸出提供獨立的實時體積和採樣率轉換(彎音)。
每個超級海嘯觸發WAV擁有一個集成的光隔離器專用的MIDI端口,因此很容易連接到任何MIDI控制器。海嘯的MIDI實現包括音量控制,彎音,攻擊和釋放時間,並有能力將任何MIDI鍵到任何輸出通道,以及指定單次或每鍵循環播放。
注:要知道,這是一個3.3V器件是非常重要的,它的投入-包括觸發器和串行RX -不能承受5V的電壓!
注:海嘯是與Robertsonics合作開發。每個銷售的一部分可以追溯到他們的產品支持和持續發展。
特徵:
文件: