資料來源:https://www.sparkfun.com/products/14471
The RedBoard Edge is a remix of the SparkFun RedBoard designed to be panel mounted in your custom project enclosure. It has all of the features that the standard RedBoard has – plus a few extras – but the layout’s been shifted around so that everything is accessible from the edge of the board. Along one side is everything “user facing” – the power and reset buttons, status LEDs, barrel jack, and USB connector. Along the other side is everything “project facing” – the GPIO headers, Qwiic connectors and power headers.
The GPIO is organized into three groups by capability – PWM, SPI, and ADC – along with 5V and GND rails. There’s also a 4-pin power header with 3.3V and 5V outputs as well as a 5mm 2-pin screw terminal which is connected to VIN through the beefy rocker switch on the front.
The rocker switch is mounted flush to the board edge but an alternate footprint is also available so you can desolder it and scoot it up a few millimeters, making it possible to panel mount the switch. If you want to mount the board using standoffs, there are four mounting holes sized for 4-40 machine screws. Two of the mounting holes are plated-through for chassis grounding, which is selectable by solder jumper. The shield of the USB micro-b connector can also be connected to the chassis with a separate solder jumper.
We do not plan to regularly produce SparkX products so get them while they’re hot!
Features:
Dimensions:
Documents:
RedBoard Edge是SparkFun RedBoard的混音,旨在面板安裝在您的自定義項目機箱中。它具有標準RedBoard具有的所有功能 - 加上一些附加功能,但佈局已經轉移到一起,以便從板的邊緣可以訪問所有的東西。一方面是“用戶面對” - 電源和復位按鈕,狀態指示燈,機架插孔和USB連接器。另一方面是所有“項目面臨” - GPIO頭, Qwiic連接器和電源接頭。
GPIO通過功能分為三組:PWM,SPI和ADC以及5V和GND導軌。還有一個4針電源接頭,3.3V和5V輸出,以及一個5mm的2針螺絲端子,通過前面的強力搖臂開關連接到VIN。
搖臂開關與板邊緣齊平地安裝,但是也可以使用替代的佔位面積,因此您可以將其拆卸並將其磨平幾毫米,從而可以面板安裝開關。如果要使用支座安裝電路板,則有四個安裝孔尺寸為4-40個機器螺釘。兩個安裝孔是電鍍通孔,用於機架接地,可通過焊接跳線選擇。 USB micro-b連接器的屏蔽也可以使用單獨的焊接跳線連接到機箱。
我們不打算定期生產SparkX產品,讓他們在熱的時候得到它們!
特徵:
外形尺寸:
文件: