資料來源:https://www.sparkfun.com/products/14292
The Qwiic Shield for Raspberry Pi connects the I2C bus (GND, 3.3V, SDA, and SCL) on the 40-pin Pi connector to the SparkFun Qwiic system. Just plug the shield onto your Pi 3, Pi Zero, or Pi ZeroW, plug in a cable, and start playing with a variety of sensors and actuators. There are four connectors, all on the same I2C bus, so you can connect multiple devices.
The shield was designed to work conveniently with our popular Pi Tin enclosure included in the Raspberry Pi Starter Kit. Unlike most Pi Hats this board sits to the side of the Raspberry Pi to make it easy to connect boards when the enclosure is in place. Be sure to follow the ‘USB->’ indicator on the board!
The Raspberry Pi has a 50mA limit on the 3.3V pin so we’ve included a 3.3V regulator that can provide up to 600mA with short circuit and thermal protection. Additionally, we’ve broken out the major pins and made them accessible through an empty 0.1" footprint allowing you to turn your prototype into something a little more permanent.
The Qwiic system enables fast and solderless connection between popular platforms and various sensors and actuators. You can read more about the Qwiic system here. We carry 50mm, 100mm, 200mm, 500mm, and breadboard friendly Qwiic cables.
We do not plan to regularly produce SparkX products so get them while they’re hot!
Features:
Documents:
Raspberry Pi的Qwiic Shield將40針Pi連接器上的I 2 C總線(GND,3.3V,SDA和SCL)連接到SparkFun Qwiic系統。只需將屏蔽層插入您的Pi 3,Pi Zero或Pi ZeroW,插入電纜,然後開始播放各種傳感器和執行器。有四個連接器,都在相同的I 2 C總線上,因此您可以連接多個設備。
盾牌被設計為與Raspberry Pi入門套件中包含的受歡迎的Pi Tin外殼方便地配合使用。與大多數Pi帽不同,該板位於Raspberry Pi的一側,以便在機箱到位時輕鬆連接主板。一定要按照板上的“USB->”指示燈!
Raspberry Pi在3.3V引腳上具有50mA限制,因此我們包括一個3.3V穩壓器,可提供高達600mA的短路和熱保護。此外,我們已經打破了主要的針腳,並通過一個空的0.1“足跡讓他們可以訪問,讓您將您的原型變成更長久的東西。
Qwiic系統可實現流行平台和各種傳感器和執行器之間的快速無焊接連接。您可以在這裡閱讀有關Qwiic系統的更多信息。我們攜帶50mm , 100mm , 200mm , 500mm和麵包板友好的 Qwicic電纜。
我們不打算定期生產SparkX產品,讓他們在熱的時候!
特徵:
文件: