進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
Qwiic Micro OLED
原名
Qwiic Micro OLED
貨號
SPX-14269
特價
641
資料來源：https://www.sparkfun.com/products/14269
The Qwiic Micro OLED is a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next project or displaying diagnostic information without resorting to serial output.
The main thing to note about the Qwiic Micro OLED is that it is wired to be in I2C mode permanently. In I2C mode, this OLED runs significantly slower than it does in SPI mode. However, it is still a useful and versatile display for low data rate imaging. Displaying current readings from a variety of sensors? Great! Playing a high-speed, side-scrolling video game? Not so much.
The Micro OLED has two selectable I2C addresses. There is a jumper on the back of the board to select between the two. This is pulled high by default, assigning the address 0x3D. Closing the jumper connects the address line to GND, assigning the address 0x3C.
The OLED ships loose from the PCB. To mount the display, we recommend double-sided, foam tape for a permanent solution or sticky-tack for a non-permanent solution.
The Qwiic version of the Micro OLED has two Qwiic connectors that allow you to easily and quickly attach the display to the Qwicc Shield of your choosing. The Qwiic system enables fast and solderless connection between popular platforms and various sensors and actuators. You can read more about the Qwiic system here. We carry 200mm, 100mm, 50mm, and breadboard friendly Qwiic cables.
We do not plan to regularly produce SparkX products so get them while they’re hot!
Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.
Features:
- Operating Voltage: 3.3V
- Operating Current: 10mA (20mA max)
- Screen Size: 64x48 pixels (0.66" Across)
- Monochrome Blue-on-Black
- I2C Interface
- Dual Qwiic connectors for fast connection and optional daisy-chaining
Documents:
- Schematic
- Eagle Files
- Datasheet (SSD1306)
- Arduino Example Sketches
- GitHub
- Check out the SparkFun Micro OLED Breakout Hookup Guide for more information on how to use the Micro OLED.
Qwiic Micro OLED 是一個小型單色藍光黑底 OLED。它很 “Micro”，但是它仍不可小覷 - OLED 顯示器是清晰的，你可以放上大量的圖形。這個擴充板將完美的圖形添加到您的下一個項目，無須訴諸串行輸出顯示的診斷信息。
需要注意的Qwiic微型OLED最主要的是，它是連接到在I2C模式永久。在I2C模式下，此OLED的運行速度比它在SPI模式顯著慢。然而，它仍然是低數據速率成像的有用的多功能顯示。顯示當前讀數從各種傳感器的？大！播放高速，橫向捲軸遊戲？沒那麼多。
微型OLED具有兩個可選的I2C地址。有在電路板的背面的跳線在兩者之間進行選擇。這是默認拉高，分配地址0x3D之間。關閉跳線連接地址線至GND，分配地址為0x3C。
該OLED船從PCB鬆動。為了安裝顯示，我們建議的永久溶液或粘性粘性的非永久的解決辦法雙面，泡棉膠帶。
微型OLED的Qwiic版本有兩個Qwiic連接器，讓您輕鬆，快速地連接顯示到您所選擇的Qwicc盾。所述Qwiic系統使流行的平台和各種傳感器和致動器之間的快速和無焊連接。你可以閱讀更多有關Qwiic系統在這裡 。我們進行200毫米 ， 100毫米 ， 50毫米和線路板友好 Qwiic電纜。
我們不打算經常產生SparkX產品因此得到他們，而他們是熱的！
特徵：
- 工作電壓：3.3V
- 工作電流：10mA（20mA的最大）
- 屏幕尺寸：64×48像素（0.66“穿越）
- 單色藍上黑
- I 2 C接口
- 雙Qwiic連接器，用於快速連接和可選的菊花鏈
文件：
- 概要
- 鷹文件
- 數據表 （SSD1306）
- Arduino的實施例的草圖
- GitHub上
- 退房SparkFun微型OLED突圍聯播指南 ，了解如何使用微OLED的更多信息。
