進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

MyoWare肌肉傳感器

原名
MyoWare Muscle Sensor

貨號
SEN-13723

特價
1,287

資料來源:https://www.sparkfun.com/products/13723

Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks… but what if we could take the buttons, levers and joysticks out of the equation? This is the MyoWare Muscle Sensor, an Arduino-powered, all-in-one electromyography (EMG) sensor from Advancer Technologies. The MyoWare board acts by measuring the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. It’s that easy: stick on a few electrodes (not included), read the voltage out and flex some muscles!

The MyoWare Muscle Sensor is the latest revision of the Muscle Sensor of old, now with a new wearable design that allows you to attach biomedical sensor pads directly to the board itself getting rid of those pesky cables. This new board also includes a slew of other new features including, single-supply voltage of +3.1V to +5V, RAW EMG output, polarity protected power pins, indicator LEDs, and (finally) an On/Off switch. Additionally, we have developed a few shields (Cable, Power, and Proto) that can attach to the Myoware Muscle Sensor to help increase its versatility and functionality!

Measuring muscle activity by detecting its electric potential, referred to as electromyography (EMG), has traditionally been used for medical research. However, with the advent of ever shrinking yet more powerful microcontrollers and integrated circuits, EMG circuits and sensors have found their way into all kinds of control systems.

Note: Biomedical sensor pads can be found in the Recommended Products section below to be purchased separately.

Get Started with the MyoWare Muscle Sensor Guide

Features:

  • Wearable Design
  • Single Supply
    • +2.9V to +5.7V
    • Polarity reversal protection
  • Two Output Modes
    • EMG Envelope
    • Raw EMG
  • Expandable via Shields
  • LED Indicators
  • Specially Designed For Microcontrollers
  • Adjustable Gain
  • 0.82" x 2.06"

Documents:

Videos

使用我們的肌肉控制的事情是,我們大多數人都習慣於這樣做的方式。我們按鈕,拉動操縱桿,操縱桿的舉動......但如果我們能採取什麼樣的按鈕,控制桿和操縱桿的方程?這是MyoWare肌肉傳感器,一個Arduino供電,所有功能於一身的肌電圖(EMG)從墊資技術傳感器。該MyoWare板的行為通過測量肌肉的過濾和糾正的電活動;輸出0-VS取決於在選定的肌肉,其中VS表示電源的電壓活動量伏。就是這麼簡單:粘在幾個電極(不含稅),讀取電壓輸出和彎曲部分的肌肉!

該MyoWare肌肉傳感器是老肌肉傳感器的最新版本,現在用新的可穿戴式的設計,可讓您連接生物醫學傳感器墊直接到主板本身擺脫那些煩人的線纜。這種新的董事會還包括其他新功能,包括,+ 3.1V的單電源電壓+ 5V電壓,RAW EMG輸出,極性保護電源引腳,LED指示燈,以及(最後)的On / Off開關擺。此外,我們還開發了一些防護罩( 線纜電源 ),可以連接到Myoware肌肉傳感器,以幫助提高其通用性和功能!

通過檢測其電位測量肌肉活動,稱為肌電圖(EMG),傳統上一直用於醫學研究。然而,隨著不斷縮小但功能更強大的微控制器和集成電路的出現,EMG電路和傳感器已經找到自己的方式進入各種控制系統。

注:生物醫學傳感器墊可在推薦產品下面部分需另行購買被發現。

入門與MyoWare肌肉傳感器指南

尺寸:0.82“×2.06”

特徵:

  • 可穿戴式設計
  • 單電源
    • + 2.9V至+ 5.7V
    • 反極性保護
  • 兩種輸出模式
    • EMG信封
    • 原始肌電圖
  • 通過擴展盾牌
  • LED指示燈
  • 專為微控制器
  • 可調增益

文件:

前往
現貨型錄

Line share