進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
12V電磁閥 - 3/4“
原名
12V Solenoid Valve - 3/4"
貨號
ROB-10456
特價
262
資料來源：https://www.sparkfun.com/products/10456
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it’s actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine.
Documents:
- Datasheet (AQT15SP)
你是否曾經想控制使用計算機或單片機液體的流動，但不知道怎麼樣？那麼，這裡的如何：將12V電磁控制流體閥。簡單地將流體源連接至3/4“螺紋入口和直到12V施加到螺線管的快速連接器上，將中斷的流動。
注意：這不是一個重力進料螺線管。這意味著你將需要足夠的水壓完全打開閥門。檢查下面的數據表具體細節。它工作在最低約3的PSI，從而使流動的約3升/分。雖然數據表顯示了閥門在220 VAC工作，它實際上12 VDC的。我們的350 GPH泵不具有該閥足夠的壓力。花園水管或其他加壓系統應該只是罰款。
文件：
- 數據表 （AQT15SP）
