資料來源:https://www.sparkfun.com/products/14273
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short it out while still allowing full access to the board. Simply snap the RPi into the bottom half of the enclosure, then snap on a desired top. No tools required!
Each case has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a standard lid, a GPIO lid (allowing access to the GPIO pins from above) and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi camera to be fitted neatly inside it). Additionally, each case includes a 4cm long CSI cable and four rubber feet.
Note: This case does NOT include a Raspberry Pi or Camera Module.
Includes:
Raspberry Pi Zero Case被設計成適合Pi Zero和Pi Zero W.這些官方案例由幾個部分組成,並保護Raspberry Pi Zero免受諸如流氓電線之類的東西,這可能會使其短暫,同時仍然允許完全訪問板。只需將RPi卡入機箱的下半部分,然後卡入所需的頂部。無需工具!
每個案例都有一個標準的基礎,具有可以訪問GPIO的切口,以及三個蓋子的選擇:標準蓋子,GPIO蓋子(允許訪問上面的GPIO引腳)和相機蓋與提供的短相機電纜一起使用,可以將Raspberry Pi相機整齊地安裝在其內)。此外,每種情況包括4厘米長的CSI電纜和四個橡膠腳。
注意:這種情況不包括樹莓派或攝像頭模塊。
包括: