進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
Scanse掃描3D掃描儀套件
原名
Scanse Sweep 3D Scanner Kit
貨號
KIT-14482
特價
17,158
資料來源：https://www.sparkfun.com/products/14482
The Scanse Sweep 3D Scanner Kit is an advanced 60-piece DIY kit that gives you everything you need to assemble a 3D scanner using your Scanse Sweep LIDAR sensor (not included). Outdoor 3D scanning has been around for decades, but has traditionally been much too expensive for home use. This kit aims to put this powerful technology into the hands of makers who want to develop and experiment with applications for long-range 3D scanning. The only tools you will need are a soldering iron, wire stripper, small Phillips-head screwdriver and 2.5mm ball-end hex key.
Each Scanse Sweep 3D Scanner Kit is controlled by an included Raspberry Pi 3, a stepper motor and driver HAT, and a 9DoF IMU — all housed inside an included 3D-printed enclosure. As the Scanse Sweep rotates in its seat, the top of the 3D scanner pivots back and forth, providing a complete three-dimensional scan of its surroundings!
This kit is not a finished product, but an evolving community effort. It’s built for DIY enthusiasts who want to get their hands dirty and try new things. We aren’t kidding; there is a lot of work that goes into assembling this kit, so we only recommend it for those of you looking for a challenge. If anything happens with any of the parts while you are assembling the kit, there is a full list of parts included in the kit, as well as 3D print files in the Documents tab.
Note: This kit does NOT include a Scanse Sweep, which will need to be purchased separately.
Important: As this is a DIY project, we are not offering any guarantee, dedicated support or refunds. Any support questions should be directed to the forum community and the issues tracker on the project GitHub page (found in the Documents tab). Buyer beware! We will not accept any returns on this product!
Includes:
- 1x Raspberry Pi 3B
- 1x Adafruit DC and Stepper Motor HAT for Raspberry Pi
- 1x Adafruit 9-Axis IMU — BNO055
- 1x MicroSD Card Reader
- 1x 14mm Circular Bubble Spirit Level
- 1x 16GB MicroSD Card
- 1x MicroUSB Female Cable
- 1x Sinoele Ultra Slim 10000mAh Power Bank
- 1x Super Glue
- 1x Double-Sided Tape Square
- 2x MicroUSB to USB 3.5in Cable
- 1x SS-01GL13P — Snap Action Switch, SIM Roller Lever
- 2x 3/16in Heat Shrink Tubing, 0.5in Long
- 1x 2.54 Pitch Single-Row 90 Degree Pin Strip Cut to 3pin, 3pin, 4pin
- 1x 10K Inline Resistor
- 7x Jumper Wire, 8in (2 Blue, 1 Yellow, 1 Green, 1 Black, 2 Red)
- 11x Phillips-Head Machine Screw 0.092-28, 0.375 LG
- 4x Phillips-Head Machine Screw 0.092-28, 0.75 LG
- 4x Flat-Head Machine Screw, M2.5, 4mm LG
- 2x Flat-Head Machine Screw, M3, 6mm LG
- 3x Socket-Head Cap Screw, M3, 8mm LG
- 1x ¼-20 Nut
- 2x Nylon Unthreaded Spacer — 94639A711
- 1x 14HR08-0654S — 0.9DEG 4.55V Round Stepper Motor
- 3x Ball Bearing — 3mm x 8mm x 3mm
- 1x Spherical Scanner Cover, Square (P0087)
- 1x Spherical Scanner Battery Holder, Square (P0088)
- 1x Spherical Scanner Cable Clip (P0090)
- 1x Spherical Scanner Light Pipe (P0091)
- 1x 90 Degree Cylindrical Scanner Bracket, Tall (P0092)
Documents:
Videos
Scanse掃描三維掃描儀套件是一個先進的60件套DIY工具包，為您提供使用Scanse掃描LIDAR傳感器（不包括在內）組裝3D掃描儀所需的一切。室外三維掃描已經存在了幾十年，但傳統上家庭使用太昂貴了。這個套件的目標是把這個強大的技術交給想要開發和試驗遠程3D掃描應用程序的製造商。唯一需要的工具是烙鐵，剝線鉗，小十字螺絲刀和2.5毫米球頭六角扳手。
每台Scanse Sweep 3D掃描儀套件都由附帶的Raspberry Pi 3，一個步進電機和驅動器HAT以及一個9DoF IMU控制 - 全部安裝在附帶的3D打印機箱內。當Scanse Sweep在座位上旋轉時，3D掃描儀的頂部會前後樞轉，從而提供完整的三維掃描環境！
該套件不是一個完成的產品，而是一個不斷發展的社區努力。它是為想要弄髒自己的手而嘗試新事物的DIY愛好者而設計的。我們不是在開玩笑，組裝這個套件有很多工作，所以我們只推薦給那些尋找挑戰的人。如果在組裝套件時任何部件發生任何變化，套件中包含完整的零件列表以及“文檔”選項卡中的3D打印文件。
注意：此工具包不包括Scanse掃描 ，這將需要單獨購買。
重要提示：由於這是一個DIY項目，我們不提供任何保證，專項支持或退款。任何支持問題都應該直接指向論壇社區和項目GitHub頁面上的問題跟踪器（可在“文檔”選項卡中找到）。買家當心！我們不接受這個產品的任何回報！
包括：
- 1x樹莓派3B
- 1x Adafruit直流和步進電機帽子樹莓派
- 1x Adafruit 9軸IMU - BNO055
- 1x MicroSD讀卡器
- 1x 14毫米圓形泡泡水平
- 1x 16GB MicroSD卡
- 1個MicroUSB女性電纜
- 1X的Sinoele超薄10000mAh移動電源
- 1倍超級膠
- 1x雙面膠帶方形
- 2個MicroUSB轉USB 3.5in電纜
- 1x SS-01GL13P - 快動開關，SIM滾輪桿
- 2x 3/16英寸熱縮管，0.5英寸長
- 1x 2.54間距單排90度插針條切成3pin，3pin，4pin
- 1x 10K內聯電阻
- 7x跳線，8in（2藍，1黃，1綠，1黑，2紅）
- 11x十字頭機器螺絲0.092-28,0.375 LG
- 4x十字頭機器螺絲0.092-28,0.75 LG
- 4x平頭機器螺絲，M2.5,4mm LG
- 2x平頭機器螺絲，M3,6mm LG
- 3x內六角螺絲，M3,8mm LG
- 1x¼-20堅果
- 2x尼龍無螺紋墊片 - 94639A711
- 1x 14HR08-0654S - 0.9DEG 4.55V圓形步進電機
- 3x球軸承 - 3mm x 8mm x 3mm
- 1x球形掃描儀蓋，方形（P0087）
- 1x球形掃描儀電池盒，方形（P0088）
- 1x球形掃描器電纜夾（P0090）
- 1x球形掃描儀光導管（P0091）
- 1x 90度圓柱形掃描儀支架，高（P0092）
文件：
