KIT-14409 MyoWare Muscle Sensor Development Kit推薦購買價格

原名

貨號

KIT-14409

特價

資料來源：https://www.sparkfun.com/products/14409

Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks…but what if we could take the buttons, levers and joysticks out of the equation? This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered, electromyography (EMG) sensor kit that provides you with a MyoWare Muscle Sensor, each MyoWare shield, and everything you need to connect them all together.

The MyoWare board included in this kit acts by measuring the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending on the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. It’s very simple to hook up this kit, attach shields to the muscle sensor, stick on a few included electrodes, read the voltage out and flex some muscles!

Also included in this kit is everything you need to set up the MyoWare Muscle Sensor: all associated shields (Power, Cable, LED and Proto), biomedical sensor pads and cable, as well as headers that can be soldered onto each shield so they can be attached together. Make sure to take a look at our MyoWare Muscle Sensor Kit Guide below for tips, tricks and best practices for assembling your MyoWare boards.

To make stacking easier, the MyoWare Muscle Sensor Development Kit includes 3-pin stackable headers. Using these on all of the shields allows for easy stacking in more configurations.

Note: The Power Shield and the LED Shield both provide power, but at slightly different voltages. Don’t use both of these shields at the same time.

Note: This item may take longer to process due to battery installed in the equipment and therefore does not qualify for our same-day shipping policy. Additionally, these batteries cannot be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.

Get Started with the MyoWare Muscle Sensor Kit Guide

Includes:

Documents:

Videos

使用我們的肌肉來控制事物是我們大多數人習慣做的方式。我們按下按鈕，拉桿，移動操縱桿...但是如果我們可以把按鈕，槓桿和操縱桿從方程式中取出？這是MyoWare肌肉傳感器開發套件，一個Arduino供電的肌電圖（EMG）傳感器套件，為您提供了一個MyoWare肌肉傳感器，每個在SparkFun開發的MyoWare盾牌以及您將所有連接在一起的所有內容。

該套件中包含的MyoWare板可以通過測量肌肉的過濾和整流電活動來實現;根據所選擇的肌肉中的活動量輸出0-Vs伏特，其中Vs表示電源的電壓。連接這個套件非常簡單，將屏蔽附加到肌肉傳感器上，粘在幾個電極上，讀出電壓並彎曲一些肌肉！

此套件中還包括設置MyoWare肌肉傳感器所需的一切：所有相關屏蔽（電源，電纜，LED和Proto），生物醫學傳感器墊和電纜，以及可焊接到每個屏蔽上的插頭，以便它們可以連在一起確保看看我們的MyoWare肌肉傳感器套件指南，了解組裝您的MyoWare闆卡的技巧，技巧和最佳實踐。

為了使堆疊更容易，MyoWare肌肉傳感器開發套件包括3針可堆疊的接頭。在所有屏蔽上使用這些屏蔽允許在更多配置中輕鬆堆疊。

注意：電源屏蔽和LED護罩均提供電源，但電壓略有不同。不要同時使用這兩個屏蔽。

注意：由於設備中安裝的電池，此項目可能需要更長的時間，因此不符合我們當天的運送政策。此外，這些電池不能通過地面或經濟方式運送到阿拉斯加或夏威夷。不便之處，敬請原諒。

開始使用MyoWare肌肉傳感器套件指南

包括：

文件：